Safety production responsibility content 1
Party A: Party B:
In order to implement the safety production policy of "safety first, prevention first", ensure the implementation of various construction safety measures, ensure the smooth progress of engineering construction, and ensure the personal health and safety of on-site operators. According to "Safety Production Law" and other relevant laws and regulations, combined with the actual situation of this project, both parties signed this responsibility letter on matters related to the safety construction of this project through consultation.
First, the project safety production management objectives
1, seriously implement the national laws, regulations and rules and regulations on safety in production. Adhere to the policy of "safety first, prevention first", strengthen safety management and ensure safe production.
2, put an end to fatal accidents, put an end to major mechanical equipment, poisoning, traffic and fire accidents.
3, put an end to fatal accidents, avoid serious injuries, the serious injury rate is less than 0.3 ‰, reduce minor injuries, and the annual industrial injury frequency is less than 10‰.
4. Seriously study and implement the JGJ59-99 standard of the Ministry of Construction to ensure that this project can reach the qualified standardized site.
Two. Safety responsibilities of Party A (captain or team leader):
1, strictly abide by the safety laws and regulations and the responsibility system for production safety, arrange work reasonably according to the skills, physical strength and thoughts of the team members, and make safety technical disclosure. When a team assigns two or more jobs, a temporary person in charge must be appointed to take charge of the safety work and be responsible for the safety team.
2, organize team members to learn safety technology operating rules, carry out safety activities, adhere to the safety speech before class, specifically explain the matters needing attention, and fill in the daily team activity records.
3. Conduct on-site safety education for the newly transferred workers, be familiar with the environment and posts, and designate special personnel to be responsible for personal safety.
4, often check the site safety production situation, handle or report in time when problems are found.
5, urge the workers on duty to use personal protective equipment correctly.
6, education team members stick to their posts, not illegal command, not illegal operation, not in violation of labor discipline, at the same time to do a good job of self-inspection, mutual inspection, handover inspection.
7. Obey the unified coordination and management of the personnel of the project department, be responsible for the civilized construction of the construction area, and ensure that the regional civilization and environmental sanitation meet the standards.
8, inductrial injury accident to rescue immediately, to record in detail and report in time, organize the class personnel to carefully analyze the reasons, put forward preventive measures, major casualty accidents to protect the scene and report in time.
Three. Safety responsibilities of Party B (team member):
1. The worker is the first person responsible for production safety in this position, and is responsible for the safety of himself, the environment and others during the operation of this position.
2. Keep in mind the principles of safe production, everyone's responsibility, prevention first and safety first, actively participate in safety activities and receive safety education.
3. Seriously study and master the safety operation procedures and related safety knowledge of this type of work, conscientiously implement the requirements of safety technical disclosure, and obey the supervision and guidance of safety production management personnel with an open mind.
4, the correct use of protective, cold supplies and safety production equipment, take good care of the safety signs of safety facilities, obey the distribution, stick to their posts, do not arbitrarily start the mechanical and electrical equipment operated by others, and strictly abide by job responsibilities and safety operation procedures.
5. Do not drink for four hours before going to work; Strictly implement the "three-work system" and improve the safety production level of self-prevention, mutual prevention and joint control.
6, check the tools and equipment used before going to work, after work for cleaning, maintenance, maintenance, found unsafe factors in the work, to immediately report to the class, team leader, and put forward suggestions for improvement.
7, beware of safety accidents, to ensure the realization of the goal of safe production, in the event of an accident, actively rescue, and immediately report to the superior.
8, an accident or attempted accident, should immediately report to the team leader, to participate in accident analysis, draw lessons from the accident, and actively put forward reasonable suggestions to do a good job in safety production and improve working conditions.
9. Have the right to report all information about safety in production, and have the right to refuse the construction in case of serious personal danger and no guarantee measures, and report it immediately or to the relevant departments.
Fourth, others:
1. After signing, it means that both parties (responsible persons) are familiar with the safety responsibilities of this post and are willing to earnestly perform them.
2. This Responsibility Letter shall come into effect and be terminated as of the date of signing, and shall be terminated at the same time after the expiration or termination of the team (worker) labor contract.
3. Number of copies: This agreement is made in triplicate, with the same effect. One for Party A, one for Party B and one for Project Department.
Party A: (Seal) Party B: (Seal)
Representative: (signature) Project Manager: (signature)
Content of responsibility book for production safety II
Party A:
Party B:
In order to further implement the safety production policy of "safety first, prevention first", strictly enforce labor protection and safety production laws and regulations, strengthen safety production management, implement the responsibility system for safety production, strictly manage the construction site according to law, ensure the safety and health of operators in the project construction, and promote the smooth progress of the construction, this agreement is hereby signed.
I. Safety management:
1. When entering the construction site, the construction team members must wear safety helmets correctly and work in the border area.
Be sure to wear a seat belt, and the seat belt should have a reliable knot;
2. The power supply used by the construction team at the site must conform to the primary leakage protection system to ensure that
"One machine, one brake, one leakage and one match;
3. The rectification rate of potential safety hazards on site must be guaranteed to reach 100% within the time limit and be eliminated.
The emergence of major hidden dangers;
4. There is no fire accident at the scene, and the rectification rate of fire hazards must be guaranteed to be achieved within the time limit.
100%;
5. No major poisoning accidents and mass infectious diseases;
6. Must ensure that the construction site to create a safe construction site;
7. Ensure the requirements of CI image of general contracting enterprises.
Second, the safety requirements:
1. The subcontractor shall take strict safety protection measures according to the relevant regulations, otherwise the accidents and expenses caused by poor safety measures shall be borne by the subcontractor, and the responsible party shall bear the responsibilities and related expenses for casualties that are not the responsibility of the contractor;
2. Subcontractors should be familiar with and consciously abide by and implement the construction safety inspection standards and related specifications of the Ministry of Construction; Consciously abide by the local government's regulations on safe construction and the laws, regulations, norms, standards and regulations on safe production promulgated and implemented by the competent department of industry, actively participate in various activities related to promoting safe production, and effectively protect the safety and health of construction personnel.
3. Subcontractors must respect and obey the general contractor's existing rules, regulations and management methods on safety in production, strengthen their own management in accordance with the relevant provisions of the economic contract, and fulfill Party B's responsibilities.
4. The subcontractor must implement the following safety management system:
4. 1 safety technical scheme approval system: subcontractors must implement the overall construction organization design and safety technical scheme of the general contractor. The safety protection measures for individual operations compiled by subcontractors must be reported to the general contractor for approval before implementation. If the original plan changes, it must be submitted for approval again.
4.2 Subcontractors must implement safety technical disclosure system, Monday safety meeting system and pre-shift safety speech system, and make follow-up inspection management.
4.3 Subcontractors must implement safety education and training at all levels and the system of holding relevant certificates;
4.3. 1 The project manager, production manager and technical director of the subcontractor shall receive safety training and organize the construction only after passing the examination;
4.3.2 The foremen, technicians, heads of departments such as machinery and materials, and heads of departments such as professional safety management personnel shall receive safety technical training and participate in the annual safety assessment organized by the general contractor. Those who pass the examination shall apply for a safety production qualification certificate and hold relevant certificates.
4.3.4 The subcontractor's special operation personnel must meet the construction needs, and hold valid certificates (issued by the local labor department) and temporary operation certificates for special operations issued by the local labor department, and hold relevant certificates.
4.3.5 When the subcontractor's workers change the construction site or type of work, they shall be handed over and educated in the type of work.
4.3.6 Subcontractors must implement the one-hour safety activity system on Monday.
4.4 The subcontractor must implement the safety inspection system of the general contractor;
4.4. 1 The subcontractor must humbly accept the safety inspection of the general contractor, the superior competent department, governments at all levels and the competent departments of various industries, otherwise the subcontractor shall bear the losses such as fines;
4.4.2 Subcontractors must establish their own regular and irregular safety production inspection system according to the requirements of the general contractor, and strictly implement it;
4.4.3 Subcontractors must set full-time security personnel to implement the daily safety production inspection system, the foreman, the monitor's follow-up inspection system and the team self-inspection system.
4.5 The subcontractor must strictly implement the inspection and rectification system;
4.6 After the conversion of construction work, subcontractors must implement safety protection measures, equipment acceptance system and handover inspection system;
4.6. 1 All kinds of construction machinery and equipment brought by subcontractors must be products of regular national manufacturers, with good mechanical properties and complete, sensitive and reliable safety protection devices;
4.6.2 Small and medium-sized mechanical equipment and general protective facilities of subcontractors shall be reported to the relevant departments of the general contractor for acceptance after self-inspection, and can only be used after passing the inspection.
4.6.3 The subcontractor's large-scale protective facilities and large-scale mechanical equipment shall be declared to the general contractor on the basis of self-inspection and accepted by professional departments. The subcontractor must provide the technical data of the equipment, the technical performance of protective devices and the erection (installation) scheme of protective facilities as the memory of the equipment resume files, and the scheme must comply with the relevant regulations of the local government of the general contractor.
4.7 The subcontractor shall implement the safety protection acceptance sheet and handover inspection system after the construction change.
4.8 Subcontractors must implement the designated procurement system of labor protection articles of enterprises and local government departments in charge of industries.
4.9 The subcontractor must implement the system of regular quantitative supply of personal labor protection articles.
4. 10 The subcontractor must prevent and control occupational injuries and poisoning accidents.
4. 1 1 Subcontractors must strictly implement the employee casualty reporting system;
4. 12 subcontractors must implement the reward and punishment system for safety work: subcontractors should educate and restrain employees to strictly abide by the safety management regulations of the construction site, commend and reward those who abide by the rules and discipline, and punish those who violate the rules.
4. 13 subcontractor must implement safety system:
4. 13. 1 The subcontractor shall be responsible for the safety of personnel within the scope of the subcontracted project;
4. 13.2 The subcontractor must take all strict preventive measures that meet the safety standards to ensure the safety of all workplaces, and there shall be no dangerous situations that endanger the safety and health of workers, and ensure that all personnel on the construction site or nearby personnel are protected from all possible dangers on the construction site;
4. 13.3 The professional subcontractor of the subcontractor and all the personnel employed at the site shall fully abide by various safety construction clauses applicable to the project or any temporary facilities;
4. 13.4 On the construction site, the subcontractor must provide adequate and applicable lighting in every workplace and other places where workers may pass, and provide portable lighting equipment when necessary;
4.65438+
4. 13.6 The construction site and workers' operation surface must be well protected in strict accordance with the safety production and civilized construction standards stipulated by the state and the government, to ensure that workers have a safe, reliable and hygienic working environment, and illegal operation or illegal command is strictly prohibited;
4. 13.7 For those who do not meet the safety requirements, the safety management personnel of the general contractor unit have the right to request to stop work and force rectification to meet the safety standards, and the required expenses shall be deducted from the project payment;
4. 13.8 The subcontractor shall provide its employees with necessary and effective safety supplies, such as safety helmets and safety belts. When necessary, they should also wear personal protective equipment such as masks, goggles and insulating gloves;
4. 13.9 The subcontractor shall submit the safety management prevention plan within 15 days after signing the contract, detailing the safety measures to be taken, the emergency response plan and its own safety management regulations for the approval of the general contractor, but the approval does not relieve the subcontractor of its safety responsibilities;
The subcontractor shall designate at least one qualified and experienced safety personnel to be responsible for the implementation of safety plans and measures.
Three, fire security work requirements:
Four, civilized construction and personnel behavior management:
Handling of disputes over verbs (abbreviation of verb);
Other supplementary clauses of intransitive verbs
Seven, the agreement score
This agreement is made in duplicate, one for each party.
Eight. term of validity
From the effective date to the end of the contract, the general contractor: (official seal) and the subcontractor: (official seal)
Legal representative:
Entrusted agent:
Legal Representative: Authorized Agent: Year Month Day.
Contents of Responsibility Letter for Work Safety 3
In order to implement the policy of "safety first, prevention first and comprehensive treatment", implement the responsibility for production safety, effectively prevent major accidents and reduce the occurrence of various general accidents, we have signed the following _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
A, the company all kinds of accidents and casualties control objectives:
1, dead at work, seriously injured at work 0 target.
2, poisoning, heatstroke, electric shock accident 0 target.
3, more than ten thousand yuan fire accident 0 target.
4, more than ten thousand yuan equipment accident 0 target.
5. The approval rate of dust, toxic operations and various dangerous and heavy operations is 100%.
Second, the company's safety education responsibility goal:
1, the "three-level" safety education rate of new employees before entering the factory 100%.
2. The rate of safety education for workers' job transfer is 100%.
3. The semi-annual and annual safety re-education and retraining rate of employees is 100%.
4. Certificate rate of special operations 100%.
Three, safety production management requirements:
1. Strictly implement the national safety production law and the company's safety production management system. Be responsible for compiling various safety management systems and assessment methods of the company.
2, strengthen the management of production safety. Carefully supervise the performance of safety responsibilities of other management functional departments and the implementation of various rules and regulations, and promptly correct dereliction of duty and irregularities in work, production and management.
3, strengthen the supervision of production safety. Ensure that the safety inspection of the whole plant is organized at least once a month, and special safety inspections are organized in due course. Implement rectification of hidden dangers of major accidents. Not less than 12 times a year.
4. Strengthen the safety assessment. Establish and improve the safety assessment mechanism. According to the production assessment rules and regulations of each department, formulate and implement the assessment and evaluation of production safety work of each department.
5. Organize to sign the safety responsibility letter step by step, and the signing rate of the company's safety production responsibility letter reaches 100%. There are effective measures to complete the indicators specified in the responsibility book to ensure the completion of various safety indicators.
6. Be responsible for reviewing and approving shutdown maintenance and various dangerous and heavy operations. Be responsible for examining and approving the safety technical measures for the renovation of various important equipment and facilities.
7. Ensure that at least once a month, a joint meeting of the deputy ministers in charge of production safety and the heads of departments is held to analyze the trends of production safety and solve the problems of production safety in time. Not less than 12 times a year.
8. Make the company's safety education and training plan. Guide and supervise the safety education and training of all departments and workshops; Carry out safety standardization management activities to consolidate the company's safety management foundation.
9, supervise and implement the relevant labor insurance supplies distribution standards. Strengthen the management of protective equipment.
10, adhere to the principle of "four don't let go", report and deal with accidents in time, find out the reasons and take preventive measures. Put forward opinions on the person responsible for the accident and report them to the company leaders for approval before implementation.
1 1. Establish and improve safety production management files according to standards and requirements. Keep it properly and file it in time.
12. In the event of a safety accident, all annual bonuses (guaranteed monthly salary of basic salary 1000 yuan) will be seriously cancelled, and the responsibility will be investigated, or even dismissed from the factory.
13. If the work of the signer of this responsibility book changes, the successor will naturally sign it.
14. This responsibility book is made in duplicate, one for the safety committee of the company and one for the person in charge.
__X
_ _ _ _ _ _ _ _ _ _ _ _ _
Contents of Responsibility Letter for Work Safety 4
A, deputy general manager of production safety responsibilities:
1. Seriously implement the safety production policy of "safety first, prevention first" and deepen the "two basics" work of safety production;
2. Strictly abide by the laws and regulations on production safety formulated by the state, governments at all levels and competent departments, and consciously accept supervision;
3. Participate in the company's safety production management;
4. Assist the general manager in his work and provide technical support for his decision-making;
5, responsible for guiding and supervising the safety production training and education activities;
6. Organize and participate in regular and irregular safety inspections;
7. Participate in the investigation and handling of various incidents and accidents;
8. Put forward rectification opinions and suggestions on the company's potential safety hazards and risks;
9. Supervise all operations of the production department;
10. Complete other temporary work assigned by the general manager.
Second, the goal:
1. The competent department has no safety, environmental protection and occupational health and safety accidents.
2, to participate in all kinds of safety inspection activities organized by the company up to 90%.
3, according to the plan to participate in training rate of 90%.
Third, rewards and punishments:
1. During the year, the company will assess the above targets, commend and reward those who meet the target requirements, and punish those who fail to meet the target requirements as appropriate.
2, consciously fulfill the legal obligations, complete the annual target, can be rated as advanced individuals in production safety.
3. Individuals who fail to meet the standards will be rejected by one vote, and the company will cancel their advanced qualification.
4. For those who neglect their duties due to irresponsible work and cause certain consequences, the company will deal with them seriously according to the seriousness of the case until they are investigated for criminal responsibility.
5, due to poor management, the major security risks in this area can not be timely rectification or cause major safety accidents, in accordance with the provisions of the State Council on the investigation of administrative responsibility for major safety accidents, give the relevant responsible personnel administrative sanctions; If a crime is constituted, criminal responsibility shall be investigated according to law.
Signature of person in charge: date:
Signature of General Manager: Date:
Safety production responsibility content 5
In order to conscientiously implement the laws, regulations and documents such as People's Republic of China (PRC) Law on Safety in Production, Shaanxi Regulations on Safety in Production, Guiding Opinions of the State Grain Administration on Strengthening Safety in Production in the Grain Industry, People's Republic of China (PRC) Fire Protection Law and Shaanxi Regulations on Fire Protection, strengthen food safety and fire protection in the grain system, and put an end to all kinds of unsafe production accidents, this letter of responsibility is hereby signed.
First, the enterprise's responsibility for production safety
(1) working principles and objectives
Adhere to the principle of "safety first, prevention first, comprehensive prevention and control", implement the safety and fire safety responsibilities of grain bureaus in accordance with the principle that county bureaus bear the responsibility of supervision and the person in charge of enterprises bear the main responsibility, and put an end to all kinds of unsafe accidents.
(2) the leadership of the safety work
1, the main person in charge of each grain depot is the first person in charge of safety production, public safety, food safety and leased site assets of the unit, and is fully responsible for the safety work of the unit.
2. Establish and improve the responsibility system for production safety, sign the responsibility book for safety step by step, clarify the responsibility for production safety at all levels and positions, and determine the responsible persons for production safety at all levels and positions.
3. We should put safety work on the important agenda, establish a system of regular safety meetings, and coordinate and solve major problems in safety work in a timely manner; It is necessary to incorporate food safety and fire safety into the scope of enterprise performance appraisal, further improve the assessment index system and assessment methods, establish and improve the reward and punishment system for safety production, and implement reward and punishment measures.
(3) Strictly implement various safety production management measures.
1. Standardize the operating rules of safety production, organize production in strict accordance with the rules, and effectively prevent the occurrence of safety production accidents such as equipment injury, grain pile collapse and fire; Strengthen grain monitoring, implement safe grain storage measures, and ensure grain storage safety.
2, organize regular production safety inspection or accident hidden danger investigation and management activities, timely discover the signs of accidents, eliminate potential safety hazards.
3, establish and improve the safety production input mechanism, improve the level of safety production guarantee, ensure the improvement of safety production facilities, equipment and other conditions.
4. Strengthen the education, training and publicity of safety production, strengthen the awareness of safety production of cadres and workers, carefully organize the "Safety Production Month" activities, and create a good safety production atmosphere.
5. Report and investigate production safety accidents in strict accordance with the Regulations on Reporting, Investigation and Handling of Production Safety Accidents, and persist in putting an end to late reporting, omission, false reporting or concealment; After the accident, it is necessary to organize rescue in time, take measures to prevent the accident from expanding, and severely investigate and deal with it in accordance with the principle of "three-no pass".
6, organize the formulation of fire safety management system and operation procedures to ensure fire safety, and check and supervise the implementation.
7, formulate feasible fire fighting and emergency rescue plan, and exercise regularly, key units exercise not less than 2 times a year.
8. Organize 1 special fire hazard control activities every year, and persist in eliminating fire hazards. The rectification rate of major fire hazards reaches 100%.
Second, the reward and punishment measures
(a) at the end of the year, the county bureau will assess the level of food safety and fire safety, and commend those who have performed their duties with outstanding achievements.
(two) where the occurrence of major food safety and fire safety accidents, can not be rated as advanced. Those who cause casualties and heavy economic losses shall be dealt with severely in accordance with relevant laws and regulations.
Responsible unit: _ _ _ _ _ _
Date: _ _ _ _ _ _
Articles related to the contents of safety production responsibility book:
★ Model of Safety Production Responsibility Letter
★ Model essay on safety production responsibility book
★ Five Safety Production Responsibility Letters 2020.
★ Five selected model essays on safety production responsibility.
★ Model of enterprise safety production responsibility book
★ Five selected model essays on safety production target responsibility.
★ How to write the responsibility book for production safety?
★ Model essay on employees' responsibility for production safety.
★ Five safety production responsibility books