Summary of post safety production work 1 Safety standardization is an important basis for preventing accidents and strengthening safety production management. According to the spirit of Panxian Safety Supervision DocumentNo. [20XX]32, our company carefully deployed and fully implemented it, focusing on two basic tasks: safety training and safety standardization, constantly improving the responsibility system and operating procedures for safety production, and further improving the safety management regulations for key parts. Pay close attention to the on-site safety supervision and inspection, through the concerted efforts of the whole company, put an end to production safety accidents, consolidate the achievements of safety training and standardization of production safety, and achieve safe, civilized and clean production. The specific work is reported as follows:
First, leaders attach great importance to it and fully implement their responsibilities.
Company leaders fully realize the importance of safety standardization, attach great importance to safety standardization, organize special meetings to discuss and implement the responsibilities of relevant departments, and decompose and implement the assessment contents of safety production standardization in detail. First of all, the company supplemented the safety standardization assessment regulations and implementation methods, increased the assessment scores of safety management and environmental protection management, and refined the safety standardization deduction standard, so that the safety standardization assessment results were linked to the managers' funds in the current month, which not only fully mobilized the enthusiasm of managers, but also really realized the reward for diligence and punishment for laziness, creating a good situation in which safety management changed from passive to active. Secondly, according to the safety management mode of the group company, the company has fully implemented the leadership contract responsibility system for key parts and the system of cadres marking posts, so that leading cadres and managers at all levels can actively promote the safety standardization management and operation, and play an exemplary role. At the same time, all employees of the company are required to actively participate to ensure the standardized, orderly and efficient work of safety production standardization.
Second, strengthen safety awareness and pay close attention to basic work at the grass-roots level
The company has further improved various safety management systems and operating procedures, published printed volumes and distributed them to all departments and workshops. At the same time, it has conducted centralized and decentralized safety training for all employees, focusing on training new employees' safety knowledge and self-protection awareness, and further organized employees to learn the responsibility system for production safety, operating procedures and operating procedures. On the other hand, organize special operations personnel and management personnel to participate in professional skills and qualification training. Through two-level safety training, not only the safety awareness of managers and employees in our company has been greatly improved, but also a new understanding of safe production according to law has been gained.
The company has standardized and improved all kinds of safety records and strengthened the management of basic data, including the comprehensive record book of the company, workshops and teams, which covers safety inspection, safety training, safety activities, etc., and requires the workshops to seriously organize and implement them, without going through the motions and superficial articles, so as to achieve practical results; Strengthen the management of all kinds of work tickets, including the permit system for hot work, temporary power operation and closed field operation, strictly implement various safety measures, strengthen the safety management of field operation, and ensure safe production.
Third, pay close attention to the rectification of hidden dangers and standardize on-site operations
The company strictly implements the hidden danger inspection and rectification system. The Safety and Environmental Protection Department organizes relevant departments to conduct joint inspections on production units every month, and actively implements rectification measures in combination with the hidden danger problems inspected by the daily inspection and the security department of the group company. The problems found in the inspection are recorded, the hidden danger rectification notice is issued, the responsible person is identified, and the rectification situation is tracked and reviewed. The hidden danger problems that are difficult to solve at one time are reported to the company leaders and solved one by one. After repeated safety inspections, a large number of hidden dangers restricting safe production have been completely eliminated, which has laid a good foundation for safe production of enterprises.
Four, highlight the management of key parts, safety standardization to a new level.
While doing a good job in daily safety production, we always take the prevention of acrylonitrile leakage and poisoning in hydration workshop and raw material tank farm as the top priority of the whole company. For the management of these key parts, the company first increased investment in safety funds, improved various safety protection devices, equipped with emergency protective equipment, and set up special personnel to maintain fire safety facilities and equipment, and regularly inspect them to make them give full play to their safety performance; Secondly, the company improved the emergency rescue plan for key parts, and organized employees to drill the plan, mastered the use of emergency rescue equipment and the handling of emergency accidents, strengthened the emergency response and handling ability of employees to sudden accidents, and ensured the safety of key parts without accidents.
Safety standardization is a systematic project and an important part of enterprise management system, and it needs long-term unremitting efforts to achieve the expected results. Our company will carry out safety standardization work to the end for a long time, strengthen safety management, improve intrinsic safety, and continuously deepen and improve safety standardization work.
Summary of post safety production work 2. Standardization of safety production in power generation enterprises is a key task for all enterprises in XXXX system in 20xx. At the beginning of 20xx, XXXX Company established the goal of standardization of safety production, which is "to ensure the level 2 standard and strive for the level 1 standard", carefully studied relevant documents, and the safety supervision department made preparations in advance, and made the following work:
First, the development of safety production standardization work
(a) to understand the spirit of the document and guide the practical work.
In order to make the standardization of safety production run effectively, we have made serious preparations, which is a brand-new task for us, which requires us to do our best to "eat" the spirit of the document and master the essence of standardization of safety production. We printed the superior documents and leaders' speeches into volumes for everyone to learn and put forward working ideas.
(two) the establishment of organizations, work in an orderly manner.
After making sufficient preparations, on April 17, the Safety Supervision Department issued the document XXX Electric Safety Supervision No.20xx6 "Notice on Establishing Intrinsically Safe Enterprises and Standardizing Work Arrangements for Safety Production", set up a leading group headed by the general manager of the company, set up an office for standardization work for safety production, rearranged the work for reaching standards and put forward work requirements.
In May, the Safety Supervision Department organized the "Kick-off Meeting of Safety Production Standardization Self-inspection" to re-arrange the safety production standardization self-inspection and explain the use of the self-inspection platform.
(3) Going out of study
In order to do a good job in this work, the safety supervision department adopted the working method of "learning from the classics" and "sending treasures", and went to XX Power Plant to study and visit, learn from each other's strengths and learn some experiences. At the same time, we also passed on our good practices to our brother factories, which achieved good results.
(IV) Work progress
1. The safety supervision department has assigned a special person to take charge of this work. In order to simplify the work procedures and reduce the work intensity, the safety supervision department has made a "platform" for the standardization and compliance of safety production, and the responsibilities are assigned to people, so that the work can be carried out in an orderly manner.
2. According to the requirements of standardization of production safety, the composition of the company's production safety committee was readjusted, and the working system of "safety committee" was formulated; On-site management was strengthened, "Regulations on the Use of warning tape of XXXX Company" was issued, and the emergency plan was revised and improved; The rectification of the problems found in major hazard sources was verified; Check the flood control material reserves, etc., and all units are also actively working, and the standardization of safety production is carried out in depth throughout the company.
3. The Safety Supervision Department has formulated the Division of Work and Requirements of Self-inspection Professional Groups for Standardization of Work Safety, put forward specific requirements for the self-inspection work of standardization of work safety, and set up four professional groups for inspection and evaluation, and made a specific division of work for the work of the professional groups, with the responsibility to the people and their respective responsibilities.
4. Each evaluation team made an investigation and evaluation on the safety production standardization 13 and 1 18 in 139. After investigation and review, the score rate is 96.7%. Six problems were found, and all of them made rectification plans.
Second, the standardization work progress, the next step plan
On the basis of self-examination, self-assessment, rectification and improvement, from September 17 to September 20, XXXXX Safety Assessment Management Consultant Co., Ltd. conducted a site review of our company's safety production standardization, and found 33 points deducted and 43 questions. Among them, the safety production management team deducted 7 points and found problems 10, including 3 key problems; 6 points were deducted from the review of the operation safety team, and 9 problems were found by * * *, including 2 key problems; 2 points were deducted from the evaluation of occupational health group, and 2 problems were found, including key problems 1; Deduction items 18 were reviewed by the production equipment and facilities group, and 22 problems were found, including 8 key problems. Should score 1470, actual score 1387, and comprehensive score is 94.35. The standardization of safety production in Tangshan Thermal Power Company meets the first-class standard, and has now entered the audit stage of the State Electricity Regulatory Commission.
On the basis of achieving the first-class standard of safety production standardization, efforts should be made to improve the comprehensive quality of employees, and good behavior in production management and on-site operation will become a habit, so as to realize independent management of "I want safety". Create an intrinsically safe enterprise and realize the "cultural standard" of the intrinsically safe enterprise.
Third, consolidate the achievements of reaching the standard
In order to further consolidate the safety in production, ensure that the problems found in the on-site review can be rectified in time, and realize comprehensive standardization and standardized management, XXXX Company issued the Rectification Plan for Problems Found in the Standardized On-site Review of Electric Power Safety Production on September 25th, 20xx, requiring relevant units to carry out rectification according to the plan and implement the responsibility system. As of 1 1 20th, 30 items have been rectified, and the closed-loop rate of rectification problems is 9 1%. Now, the completion of rectification and the unfinished rectification are reported as follows:
(1) Completion:
(2) Description of unfinished business:
5.3.2 Expenses shall be listed in the next annual plan. At present, all expenses in 20xx years have been charged and will be issued in February/kloc.
5.6.3.2 DC small air-opening test needs to purchase special test instruments, and a special person has been appointed to implement the test instruments.
5.6.3.4 has designated the adjustment plan for pipe supports and hangers of boiler #2, which is expected to be completed in March of 20xx.
Four, the selection of accreditation bodies and the determination of accreditation fees, the evaluation of accreditation bodies
The standardization of safety production is a key work vigorously promoted by XXXX system in 20xx. Based on the principle of "being qualified, nearby and simple", XXXX Company consulted several evaluation institutions, and finally determined "XXXX Safety Evaluation Consultant Co., Ltd." designated by the State Electricity Regulatory Commission as the third-party evaluation institution. Combined with the evaluation of the market at this stage, the final price is 80% of that of similar evaluation institutions, and the total price of the first-class standard is 430 thousand yuan.
XXXX Safety Evaluation Management Consulting Co., Ltd. is a company involved in safety technology, media
And tourist hotels, with Grade A qualification of safety evaluation issued by state administration of work safety. The Group is mainly engaged in safety evaluation, safety quality standardization evaluation, safety science and technology research, safety technical consultation, accident emergency plan preparation, guidance on enterprise safety culture construction, development and sales of safety culture products, safety books, safety audio-visual products, safety software and databases, news newspapers, online media and other businesses. The company has nearly 300 employees, including more than 50 professional technicians 100, nearly100 people have obtained master's degree or senior technical titles, 65 people have obtained the qualification of safety assessor, and 78 people are registered safety engineers. Outstanding achievements have been made in the field of safety evaluation. By the end of 20xx, more than 0/000 national key engineering safety evaluation projects have been completed, covering chemical industry, petrochemical industry, medicine, electric power, metallurgical nonferrous metals, non-coal mines, coal mines, petroleum, natural gas, liquefied gas, pharmaceuticals, construction, cement and building materials, machinery, tobacco, light industry, highways, railways, ports and docks and many other industries, and distributed in nearly 30 industries. CMA safety evaluation is famous for its specialization and standardization. Under the leadership of Dr. Li Zhixian, the president, the company adheres to the enterprise spirit of "pioneering and enterprising, tenacious struggle", wins the praise of users with high-quality service and establishes the corporate image with good reputation.
Five, the problems and suggestions in the process of standardization work.
1. The personnel participating in the evaluation of the enterprise have a poor understanding of the documents, and there is still a certain gap in the standard, so the evaluation level needs to be improved.
2.XXXX company, the evaluation experts are mainly young people, and the production experience is insufficient. Sometimes there is a tendency of "bookishness" in the evaluation process. It is suggested to employ experienced old experts, combine "old, middle and light" and learn and improve through evaluation.
Summary of Work Safety in Post 3. Work safety standardization of Golmud Yuyuan Co., Ltd., conscientiously implement the spirit of Qinghai Provincial Work Safety Supervision Administration, Qing's No.2 [20xx]15 and Qing's No.32 [20xx], actively, steadily and orderly carry out the work of reaching the standard, and formulate the safety management system and operating procedures by establishing the responsibility system for work safety. Investigate and control hidden dangers and monitor major hazard sources, establish prevention mechanism, standardize production behavior, make all production links meet the requirements of relevant safety laws, regulations and standards, ensure that people, machines, materials and environment are in a good production state, and continuously improve management performance and continuously strengthen the standardization of enterprise safety production. Safety production standardization is the basic requirement and measure for enterprises to carry out safety production work. Carrying out the standardization construction of safety production is a national mandatory requirement, and it is also an urgent need for enterprises to further improve the long-term safety mechanism, strengthen and innovate safety management, implement the main responsibility of enterprises, improve the safety management level of enterprises, strengthen safety supervision, improve law enforcement efficiency, standardize safety production behavior and effectively prevent accidents, which is complementary to the relevant occupational health and safety management system; Safety production standardization is an important method and means for enterprises to deepen the standardized management of each post and continuously improve the related occupational health and safety management system.
Facts have proved that the standardization of safety production is very necessary for the development of every enterprise. Therefore, in order to make enterprises flourish, we must do a good job, do a detailed job, do a solid job and do a successful job in standardization of safety production. As a metallurgical enterprise, Yuyuan Company has made some achievements in safety construction, safety culture, safety education, safety benefits, etc. since this work was carried out, achieving safety production without accidents and achieving good economic and social benefits.
First, our working ideas and overall goals
(A) working ideas
Firmly establish the concept of scientific development and safe development, and adhere to the policy of "safety first, prevention first and comprehensive management"; Guided by the document "Guiding Opinions of the State Council Safety Committee on Deepening the Construction of Enterprise Safety Production Standardization", thoroughly implement the standards of "Basic Standards for Enterprise Safety Production Standardization" and "Requirements for Occupational Health and Safety Management System"; Based on the current safety production management system, establish and improve the safety production standardization system; Establish and maintain the standardized operation mechanism of safety production by reaching the standards of posts (types of work), processes, specialties and enterprises; steadily push forward and fully realize the standardized management of safety production in accordance with the principles of "first focus, then general" and "first pilot, then promotion".
(2) Overall objective
We will build a standardized, organic and self-improvement safety production standardization system, and continuously and comprehensively achieve job standards, process standards, professional standards and enterprise standards.
1.The post is up to standard. Enterprises carry out the establishment of job standards, focus on the main job standards at the grass-roots level, continuously improve employees' safety awareness and operational skills, realize job standardization and job site standardization, and make employees "do not hurt themselves, others or others". Through post compliance, process compliance, specialty compliance and enterprise compliance will be achieved step by step.
2. The process is up to standard. According to the process characteristics of each post, the post operation standard is determined, and the process standard is realized according to the standard. Through the process of reaching the standard, the professional standard and the enterprise standard are gradually achieved.
3. Professional standards. According to the post characteristics, determine each professional post, sort out and improve the site management standards and process control standards, and realize the standardized management of safety production in each major according to the standards. Gradually achieve enterprise standards through professional standards.
4. Enterprises meet the standards. Establish and improve the safety standardization system, further implement the main responsibility of safety production, carry out post standards, process standards and professional standards, strengthen safety management and employee health management, improve management level, promote enterprises to establish and improve a long-term mechanism of self-discipline and self-improvement, and realize enterprise safety production standardization.
Three, the main framework and content of safety production standardization construction
(A) the overall framework of the construction content of safety production standardization
Based on the core elements stipulated in the Basic Standard for Standardization of Enterprise Safety Production, the requirements of Occupational Health and Safety Management System and the practice of enterprise safety production management, the core requirements, namely the safety production policy and objectives, are determined. Safety production organization and responsibility system; Laws, regulations and rules and regulations; Safety production investment; Safety education and training; Construction of safety culture; Identification, risk assessment and control of major hazard sources; Safety management of facilities, equipment, protective equipment and materials; Safety management of interested parties; Safety technology management; Implement operation safety on site; Occupational health; Emergency rescue; Safety inspection and hidden trouble investigation and management; Accident reporting, investigation and handling; Safety performance evaluation, assessment, reward and punishment and continuous improvement.
(2) The main contents of the safety production standardization system
The main contents of the company's safety production standardization system are as follows:
(1) Safety production policy and objectives. Clarify the company's safety production policy and review requirements. Describe the formulation, decomposition, revision and assessment requirements of overall and annual safety objectives, and establish the overall safety production objectives.
(2) Safety production organization and responsibility system. Clarify the organization system of safety production management, set up safety production management institutions and equip management personnel; Including appointing a management representative in the leadership to be responsible for the establishment, maintenance and improvement of the safety management system. Formulate the responsibility system (responsibility) for production safety of units, departments and posts at all levels.
(3) Laws, regulations and rules. Obtain, communicate and transform applicable laws, regulations and standards into internal systems of enterprises for implementation; Track the revision and update of laws and regulations. Define the safety production system to be established (basically covering the main aspects of 13 core elements) and safety operation regulations (GB/T2800 1 operation control and emergency plan), as well as the requirements for regular review and revision, and define the' control requirements for safety-related documents, records and materials.
(4) Investment in production safety. Management requirements for the extraction of safety expenses, earmarking of special funds, safety expense ledger, and the guarantee of safety schemes and measures.
(5) Safety education and training. Determine the required qualifications (post competency standards) of personnel in various positions that have an impact on safety production (GB/T2800 1). Take measures to ensure the post operation ability of employees, determine the competent departments of safety education and training at all levels, organize safety education and training for safety production management personnel, operators and other personnel at different levels, and evaluate and improve the training effect.
(6) Construction of safety culture. Implement people-oriented safety culture construction, evaluation and improvement management.
(7) Hazard source identification, risk assessment and control. Management requirements such as identification, risk assessment, registration and filing of major hazard sources that may cause personal injury (and health damage), and formulation of control measures.
(8) Safety management of equipment, facilities, protective equipment and materials. Management requirements for the intrinsic safety of production facilities and equipment, construction, installation, acceptance, operation/use, maintenance, dismantling, scrapping and alteration of safety protection facilities. Safety management requirements of the whole process such as material waste.
(9) Safety management of interested parties. Safety management system, communication and consultation management related to subcontractors, suppliers and other interested parties.
(10) safety technology management. Compilation, review, disclosure, process monitoring, acceptance, inspection, improvement and change control of safety technical measures and special plans.
(1 1) site construction is safe. Emphasis is laid on the safety management requirements of on-site safety disclosure (hazard source and risk notification), civilized construction, construction operation process, construction operation behavior, safety protection, safety warning signs and changes. For the safety management of the construction operation process, the work permit of the key and dangerous operation activities, the on-site supervision by special personnel, the monitoring and analysis of hidden dangers, etc.
(12) Occupational health. Announcement on provision and maintenance of working environment and conditions, provision of protective equipment, detection of occupational hazard factors, emergency rescue and occupational hazards 5
Summary of Work Safety in Post 4 According to the requirements of the Notice on Forwarding the Guiding Opinions on Further Carrying out the Standardization Work of Work Safety in Enterprises (xxx Safety Supervision [20xx]175) issued by the Learning Municipal Administration of Work Safety, the Learning Municipal Federation of Trade Unions and the * * Youth League Learning Municipal Committee, our district will start from September 19 to1/KLOC. The work is now reported as follows:
First, attach great importance to, strengthen leadership, and effectively promote the standardization of production safety in enterprises.
In order to conscientiously implement the Notice of the State Council on Further Strengthening the Work of Enterprise Safety in Production (Guo Fa [20xx] No.23), the Guiding Opinions of the the State Council Safety Committee on Deepening the Standardization Construction of Enterprise Safety in Production (No.4 of the Safety Committee) and the State Administration of Work Safety, All-China Federation of Trade Unions, * * * The Youth League Central Committee's Guiding Opinions on Deepening the Work of Standardizing Posts in Enterprise Safety Production (No.82 [20xx] of the General Administration of Work Safety, hereinafter referred to as "Opinions") and other documents, further promote the work of standardization of enterprise safety production in the whole region, promote the upgrading of enterprise safety standards, standardize enterprise safety production behavior, improve safety production conditions and enhance the intrinsic safety level of enterprises. Our district attaches great importance to it, and regards promoting the work of standardization of enterprise safety production as the key task of this year's safety production work. The office of the District Safety Committee has organized and held working meetings attended by the heads of relevant departments in the district and mobilization meetings for the heads of enterprises, which conveyed the spirit of relevant policies and made specific work arrangements. The District Safety Supervision Bureau took the initiative to meet and coordinate with the District Federation of Trade Unions and the Youth League Learning High-tech District Committee in a timely manner, and * * * studied and discussed and formulated and issued the Work Plan for Standardizing Posts of Enterprise Safety Production in xxxx District. The main leaders of the District Safety Supervision Bureau personally came forward to communicate and coordinate with the person in charge of the enterprise, and did a lot of communication, coordination, supervision and guidance, which effectively promoted the development of the standardization work of enterprise safety production.
Two, study and formulate job standards, take effective measures to carry out in-depth activities of enterprise safety production standardization post standards.
The work of reaching the post standard is divided into four stages: mobilization and deployment, study and training, supervision and inspection, and appraisal and summary. And combined with the "Opinions", study and formulate post standards, and guide enterprises to formulate practical post standards for each post with reference to the actual situation of the enterprise, so that the work of meeting the post standards can be followed. The contents include: first, the post knowledge and skills requirements, familiarity with or mastery of the dangerous and harmful factors (hazard sources) of the post and their prevention and control measures, safety operation procedures, control of key points and main process parameters of the post, self-help and mutual rescue and emergency treatment measures, etc. Second, behavioral safety requirements, such as operating in strict accordance with the operating rules, implementing rules and regulations such as job approval and handover, prohibiting all kinds of unsafe behaviors and behaviors unrelated to the operation, confirming the safety of key operations, and refusing to operate when there are no safe operating conditions; Third, equipment protection requirements, such as the configuration, use, inspection and maintenance of production equipment and its safety facilities and tools, the configuration and use of individual protective equipment, and the configuration, use and maintenance of emergency equipment; Fourth, the job site safety requirements, the job site is clean and orderly, whether the concentration (intensity) of dust, toxic substances and noise in the working environment meets the requirements of national or industrial standards, tools and articles are placed in a fixed place, safe passages are unblocked, and various signs and safety signs are eye-catching; Fifth, post management requirements, clear work tasks, strengthen job training, carry out hidden dangers investigation, strengthen safety inspection, analyze accident risks, bear in mind preventive measures and strictly implement them in place.
This activity, the district safety supervision team is responsible for tracking and coordinating, supervising and guiding enterprises to carry out their work. According to statistics, the Law Enforcement Monitoring Team of the District Safety Supervision Bureau has visited enterprises for 67 times, and dispatched personnel *** 156 times. Through the activities, the safety management order of enterprises in the whole region has been further standardized, and the standardization of post operation has been vigorously promoted, so that employees of enterprises can not hurt themselves, others and others in the process of safety production, effectively promoting the standardization construction level of enterprise safety production.
Three, the implementation of the main responsibility of enterprise safety production, and vigorously promote the safety standardization work.
Fourth, the shortcomings in the work and the next step.
Although we have made some achievements in carrying out the work of meeting the standards of enterprise safety standardization posts, due to the fact that the vast majority of enterprises in our region are newly built, the investment in special safety production funds is insufficient and the professional and technical personnel in safety production are relatively scarce. Compared with the requirements of provincial and municipal safety standardization posts, there is still a big gap in our region, and there are still many shortcomings in the work of meeting the standards of safety standardization posts. First, some enterprises are not enthusiastic and enthusiastic about the work of meeting the standards of safety standardization posts, and there are wait-and-see phenomena, procrastination and even resistance; Second, some enterprises have insufficient safety investment in the creation of safety standardization, and some outdated equipment and facilities need to be updated urgently; Third, there are few supervisors in the Safety Supervision Bureau of our district, and there is also a lack of relevant professionals, and there is a lack of corresponding technical guidance for carrying out the standardization work of enterprise safety production.
In view of the above problems, our district will further mobilize supervisors to thoroughly study and implement the relevant safety production laws, standards and requirements, continuously improve their professional ability and safety supervision level, earnestly strengthen services, increase guidance and coordination, and further do a good job in meeting the standards of enterprise safety production standardization posts in the whole district.
Summary of Work Safety in Post 5 According to the spirit of the document Notice on Forwarding the Guiding Opinions on Further Carrying out the Work of Standardizing Work Safety in Enterprises issued by Road and Bridge Construction (Road and Bridge Construction Safety Supervision WordNo. 20XX3 12), our department attaches great importance to it, actively organizes, formulates post standards, clarifies the requirements for reaching the standards, and implements the work of reaching the standards for standardized work safety in production. Now the post standard is summarized and reported as follows:
First, the establishment of organizations, in-depth implementation
In order to implement the spirit of the document and ensure the construction safety of this project, the project department set up a special leading group for post compliance, and the members of the leading group are as follows:
Team leader: Sun Xin
Deputy Head: Wang Zhenyu
Team member: Wang Wang Feng.
Second, the implementation of post safety responsibility, to ensure safety in production
(a) the project department to strengthen the system construction of safety management, constantly improve the management methods and implementation details, clear effective rules and regulations to restrain management behavior and operation behavior.
(two) the implementation of post safety responsibility, determine the safety technical measures, strengthen post operation and operation process, to prevent all kinds of accidents.
(3) Do a good job in the safety awareness of all employees, implement the safety awareness education of all employees in the whole construction process, widely publicize in various forms, and focus on training, so that the construction personnel can always sound the alarm bell.
(4) Organize all divisions to conduct comprehensive investigation in a planned and targeted manner, leaving no dead ends, finding problems, thoroughly rectifying them, and eliminating hidden dangers of accidents through investigation.
Three, improve the post safety operation technical regulations and systems
(a) to strengthen the work of safety education, improve the safety quality and self-prevention awareness of construction personnel.
(2) Establish and improve various safety production rules and regulations, operating procedures and safety precautions, and implement them layer by layer, so that all operators are known, and there are rules to follow, and violations are prosecuted.
(three) adhere to the routine inspection system of special construction machinery and safety protection equipment to eliminate potential safety hazards.
Fourth, the focus of the post standard work
(1) Raise awareness. Incorporate the standardization of safety production into a long-term mechanism, and strengthen and innovate safety management; Implement the responsibility of safety subject and improve the level of safety management; Strengthen safety supervision and improve law enforcement efficiency; Standardize safety behaviors and effectively prevent accidents. Take the standardization of safety production as a solid foundation project to promote the level of safety production, and make every effort to promote the standardization of safety production.
(2) Implementing responsibilities. In accordance with the principles of "one post and two responsibilities" and "who is in charge and who is responsible", we will comprehensively carry out the work of creating safety production standardization, apply information technology to the work of creating safety production standardization, improve the scientific and technological content of safety production supervision, and strengthen the inspection and regular evaluation of standardization creation combined with daily safety inspection to ensure the healthy and orderly progress of the work of creating safety production standardization.
(3) Typical guidance. According to the "Guiding Opinions on Post Compliance", the upsurge of carrying out the standardization construction of safety production in an all-round, whole-process and all-round way has been widely set off, and advanced experiences and practices have been summarized and popularized in time. Through post training, mentoring, theoretical competition and skill assessment, the activities of "striving for youth safety production demonstration posts" have been carried out, and "excellent workers" and "safety demonstration posts" have been selected to promote the standardization work of safety production, so as to promote enterprises to meet the standards through post compliance.
(4) Improve the mechanism. We will deepen the special rectification of production safety and the investigation and management of hidden dangers, create the standardization work content of production safety, improve various rules and regulations of production safety, standardize the safety work responsibilities of all links and posts, make them conform to the requirements of laws, regulations, rules and regulations, and bring the safety production behavior into the legal, institutionalized and standardized management track.
1. What kinds of courses are commonly used in enterprise training?
Commonly used courses in enterprise training include: human resources train