Factory production contract model 1
Party A:
Party B:
In order to improve the efficiency of production and operation, and make the enterprise turn losses into profits, the original synthetic ammonia production process was transformed into an acid production process through consultation of all shareholders of the company, and extended to downstream products. Through friendly negotiation between Party A and Party B, Party B invested in transforming the original production process, and Party B contracted the production and operation, and reached the following agreement.
1. term of contracted production and operation: from April 1 day, 2000 to April 1 day, 2000, with a period of five years. The first year is free of contracted production and operation fees. In the second year, the contracted operation fee of 400,000 yuan was paid to the shareholder Liang Yongfu, and the rest of the shareholders paid by analogy. From the third year to the fifth year, the contracted operation fee of RMB 300,000.00 Yuan shall be paid to the shareholder Liang Yongfu every year, and the rest of the shareholders shall do the same.
2. Fixed assets and equipment invested after the expiration of the contract.
Three. During the contract period, if Party B needs a bank loan for production and operation, and declares the loan in the name of Party A, Party A agrees to use the fixed assets in its name as collateral for the loan. Party A and shareholders must cooperate in handling relevant loan procedures in time. Party B must repay the loan on time with the shares held by Yi Shifeng as the guarantee. Party B shall report to the government and the company in the name of the company.
4. The creditor's rights and debts arising from Party B during the contract period shall be borne by Party B itself, and Party A shall not be liable.
5. During the contract period, Party B shall undertake all rights and obligations of the enterprise as a legal person and pay attention to safety in production. Safety accidents, responsibilities and related expenses caused by Party B's production and operation shall be borne by Party B, and Party A shall not be held responsible.
Six, Party B's 20_, 20_ year contract payment is calculated at 6,543,800 yuan per year. During this contract period, Party B will repay the arrears of the original company's fixed assets investment and land payment on behalf of the company, and the environmental protection license payment that should be borne by the company will be deducted from the contract payment that Party B should pay, and the rest will be distributed to shareholders. Du should pay the contract money to Liang Yongfu.
Seven. Matters not covered in this contract shall be settled by both parties through consultation based on the principle of friendship and seeking truth from facts.
Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _
Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Model factory production contract 2
Party A (Employer):
Party B (contractor):
Home address: ID number: Party A and Party B have reached the following agreement through equal consultation in accordance with the Contract Law of People's Republic of China (PRC) and relevant laws and regulations:
Article 1: Signing Methods and Requirements
& lt 1 & gt； During the contract period, Party B shall independently manage and account for the production personnel of semi-finished products and finished products such as blank making, palletizing, shelf storage, kiln loading, kiln discharging and kiln burning. Party A is responsible for soil supply and bulldozing, and the wages of the employees employed by Party A shall be borne by Party A, which has nothing to do with Party B. ..
& lt3> Workers required for Party B's production are recruited by Party B independently, and there is no labor contract relationship with Party A. Minor injuries below 1 10,000 yuan in the production process shall be borne by Party B, and personal injury accidents shall be borne by both parties, and both parties shall bear 50% of the expenses.
Article 2: Contract Quota and Expenses
& lt 1 & gt； During the contract period, the coal and electricity costs shall be borne by Party A.. Under the condition of ensuring the supply of raw materials, Party B must complete the production of10,000,000 pieces of qualified standard bricks within 20_ years, and the price per 10,000 pieces is 800.00 yuan (in words: eight hundred yuan). In case of irresistible natural disasters, the resulting losses shall be borne by both parties through consultation.
& lt2> If Party B wants to lead the team into the factory on time according to Party A's requirements, Party A shall pay a deposit of 50,000 yuan to Party B in advance (the deposit will be deducted in batches during Party B's normal production).
Article 3: Responsibilities and obligations of both parties
& lt 1 & gt； Before Party A starts the machine, all mechanical equipment shall be thoroughly maintained and handed over to Party B for use and management to ensure the normal production of Party B.. In case of any damage or loss, Party B shall purchase the supplements in time, which shall not affect the normal production.
& lt2> Party A has the right to supervise the quality of products produced by Party B, and the unqualified products will not be put into storage, but it should not be too picky and deliberately make things difficult for Party B. ..
& lt3> For salary settlement, Party A shall pay the contract fee to Party B twice a month, and shall not default.
Article 4: Liability for breach of contract and reward and punishment system
& lt 1 & gt； Party B must complete the annual output of/kloc-0,000,000 standard bricks. If it exceeds/kloc-0,000,000, Party B will be given a bonus of/kloc-0,000 yuan; if it is less than/kloc-0,000,000 yuan, Party B will be fined/kloc-0,000 yuan. After this contract comes into effect, both parties must strictly implement it and shall not violate it.
& lt2> Under any circumstances, Party B and its work shall not interfere with Party A's business, and shall not block or occupy Party A's business premises, otherwise, Party B shall pay Party A a loss fee of 5,000 yuan each. On the other hand, if the normal production of Party B is affected by a dispute between Party A and the local people or land, it shall also pay Party B a loss fee of 5,000 yuan.
& lt3> During the contract period, both parties treat each other honestly, cooperate sincerely, unite as one, communicate diligently, coordinate diligently, deal with problems and difficulties in time, and ensure to complete the annual production tasks, so that everyone can make money and be happy.
& lt4> Matters not covered in this contract shall be supplemented by both parties through consultation, and the supplementary agreement shall have the same effect as this contract. In case of any dispute during the execution of this contract, both parties shall try their best to solve it through negotiation. If no agreement can be reached, it can be settled through litigation in the local court.
& lt5> Supplementary explanation: In case of special circumstances, when the brick factory really can't produce normally, the set output shall be calculated according to the quantity that can be produced at that time, regardless of rewards and punishments.
& lt6> Both parties shall abide by the provisions of the contract, and neither party shall breach the contract. If one party breaches the contract, it shall pay the other party a one-time penalty of RMB 30,000.
& lt7> This Agreement is made in duplicate, one for each party, and shall come into effect as of the date of signature by both parties.
Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _
Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Model factory production contract 3
Customer (Party A): Service Party (Party B):
According to the Contract Law of People's Republic of China (PRC), both parties to the contract reached an agreement on the production contract and technical service of the cement project of t/d rotary kiln of Cement Co., Ltd., and signed this contract, which shall be implemented by both parties.
Rule number one. The object and scope of the contract
Production management and technical services of Party A's t/d rotary kiln production line (from raw material crushing to clinker storage).
Article 2: Time limit, place and method of performance of the contract
1. Performance period: calculated from the date when Party B's personnel officially enter the clinker production line and meet the standards within 72 hours; The plan is divided into two stages:
1, the first 3 months are the running-in period of the production line (starting from 72 hours after reaching the standard);
2. Officially take over the production stage.
2. Place and method of contract performance: Party B sends management personnel and technical personnel to Party A's production site for service.
Article 3. Production and economic and technical indicators
The production line managed by Party B shall meet the following indicators:
1, daily output of rotary kiln clinker: ≥ t/d (burning bituminous coal); ≥ t/d (burning anthracite);
2. Clinker strength: ≥28MPa(3 days) ≥55MPa(28 days);
3. f-CaO content in clinker: ≤ 2.0%; The qualified rate is ≥ 85%; The qualified rate of stability is 100%
4. Kiln operating rate: ≥85%
5. Annual output of clinker 10000 tons.
Article 4. Responsibilities, authority and requirements of Party B.
After Party B officially takes over the production, it is fully responsible for the production of the production line and performs the following duties:
First, introduce advanced management concepts to manage Party A's cement production line and improve the production management level of the whole enterprise;
Second, optimize the establishment of production institutions and personnel to improve labor productivity;
Third, strengthen the management of on-site equipment and environmental sanitation, and provide reasonable rectification plans for existing problems; 4. Strengthen the training for the operators of Party A's production positions, including: theoretical and practical training for cement technology, equipment maintenance and repair, automation, electricity, analysis and testing, etc. , so as to improve the comprehensive quality of post personnel;
5. Formulate various rules and regulations related to production, including operating procedures, safety procedures, inspection procedures, product quality management procedures, sampling inspection procedures, equipment management procedures and other technical management documents, so as to standardize management and institutionalize production management;
Six, standardize all kinds of production records, documents, forms, accounting, etc. ;
7. Prepare and provide various materials supply and procurement plans, such as the supply plan of bulk raw materials and quality control indicators, spare parts procurement plan, etc.
Eight, strengthen the management of production safety, improve the safety awareness of post personnel;
Nine, do a good job in saving energy and reducing consumption, repairing the old and using waste.
Authority of Party B:
Party B has absolute personnel rights and labor rights for all personnel in Party A's production posts. Requirements:
1. The personnel sent by Party B to the site shall be healthy, experienced, capable of working, competent and satisfied with on-site operations, and have the ability to deal with and solve emergency problems.
Two. Quantity and specialty of Party B's service in the factory:
Party B plans to have 15- 18 employees, including project leader 1 person, chief technician 1 person, equipment supervisor and deputy supervisor 1 person, electrical supervisor and deputy supervisor 1 person, and process supervisor/kloc-.
Three. Party B's personnel stationed at the site must abide by national laws and regulations and Party A's management system;
Article 5. Responsibilities, authority and requirements of Party A.
Responsibilities:
1. During the running-in period, Party A and Party B jointly manage the production line;
2. Party A shall timely review the documents and plans declared by Party B, and notify Party B in time if there are any problems or need to be revised;
3. Provide all kinds of raw materials and combustible materials and other materials related to production (including spare parts and tools, etc.). ) According to Party B's requirements;
Four, timely provide technical information related to production and analysis and test data of raw materials and combustible materials;
Verb (abbreviation of verb) provides suitable office space and facilities for Party B's personnel;
6. Party A shall provide accommodation, on-site transportation and other work convenience for Party B's on-site personnel free of charge;
Seven. Party A shall protect the personal and property safety of Party B's personnel. Power: Party A has the right to supervise the production management of Party B. ..
Article 6. Fees and payment methods
1. The expenses shall be settled monthly according to the output (inventory result) of the products produced. The specific rate standard is as follows: clinker, and Party B's output is calculated according to the kiln shutdown time of tons/day. Monthly clinker settlement output = monthly actual inventory+Party A's kiln stopping time × ton/day Note: Party A's kiln stopping includes the following contents:
1, materials (raw materials, spare parts, etc. ) None or the quality deviation is large.
2. Product expansion
3. Power failure (insufficient power supply)
4. Plan maintenance or vacation. 5. Party A stops the kiln for other reasons.
Second, the payment method:
(1) Pay salary of 654.38+ten thousand yuan as advance salary after signing the contract; (Fees do not include tax)
(2) After the personnel enter the factory, their wages will be settled monthly and before the 5th of the following month;
(3) The salary for the first three months shall be settled at 200,000 yuan/month. (Fees do not include tax);
(4) The formal takeover of the production stage shall be settled at the agreed rate. (Fees do not include tax);
Article 7. Liability for breach of contract and compensation methods for losses
1. If Party B's employees in the factory are incompetent, can't safeguard Party A's interests and reputation, and can't guarantee the production and economic and technical indicators, Party A has the right to ask Party B to replace people or suspend the execution of this contract (when the contract is suspended, the total wages will be deducted according to the actual number of people on site, actual working days and Party B's post).
2. When Party B receives the salary in advance, this contract will come into effect. If Party B terminates this contract, it shall return the deposit twice; If Party A terminates this contract, the prepaid salary received by Party B will be used as the expense of the resident;
Article 8. Methods of resolving contract disputes
First, solve it through consultation;
2. If negotiation fails, it may apply to the contract arbitration department where Party A is located for arbitration or bring a lawsuit to the people's court where Party A is located.
Article 9, Others
1. The debugging personnel sent by Party B to Party A's site must wear labor protection articles provided by Party A. Party B shall bear all responsibilities for personal safety accidents caused by Party B;
2. The technical personnel of Party B shall safeguard the interests and reputation of Party A. ..
Three. On-site management and technical personnel of Party B shall properly handle the relationship with Party A and actively carry out their work;
Four. This contract shall come into effect after being signed by both parties;
Five, the two sides respect each other's intellectual property rights and technical secrets, and shall not transfer or disclose technical documents, technical data, operating essentials, etc. To a third party;
Article 10 Any change, modification or addition or subtraction of the terms of this contract shall be agreed by both parties through consultation and signed by authorized representatives, which shall be an integral part of this contract and have the same legal effect.
Article 11 This contract is made in quadruplicate, with Party A and Party B holding two copies respectively.
Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _
Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Three related articles about the model factory production contract;
★ 5 copies of workshop production contract model.
★ There are 3 latest model contracts for factory workshops in 2020.
★ The latest three demonstration clauses of the factory workshop contract.
★ 3 Processing enterprise contract sample
★ 3 factory contract templates.
★ Concise factory workshop contract model 3 latest article
★ There are 3 latest contracts in the factory workshop.
★ Three model clauses of factory contract management contract
★ The latest three demonstration clauses of the production contract management contract.
★ The latest collective factory workshop contract model 3 pieces.