When only one tire is replaced, the new tire must be close to the depth of another groove on the same axle, otherwise it may lead to problems such as vehicle deviation.
Tyres of the same specification, structure, manufacturer and style shall be assembled on the same axle. (Load index and speed level are consistent) = ""If the groove depth between the new tire and the old coaxial tire is very different, at least two tires (coaxial) should be replaced.
Extended data:
The following five situations need to be replaced during use.
1. When the tire is worn to the wear limit mark, it must be stopped (i.e. the tread depth is less than1.6mm).
2, tire aging. (For example, there are countless small cracks at the bottom of tread groove or sidewall), whether it is a new tire or an old tire, this tire needs to be replaced in time.
3. Tires with deformed tread or damaged beads, tires with sidewall damage caused by airless driving and tires corroded by chemicals shall not be used continuously.
4, bulging tires shall not continue to use.
5. If other damages affect the use safety of the tire, it shall not be used again.