How to put the x6 cab of Shaanxi Automobile Xuande back after lifting?

1. Make sure that the car can be parked reliably and lifted from this position.

2. Install the wheel stop; (It is best to install two rear wheels).

3. Put the gear in the P position and put down the handbrake.

4. Place lifting pads and pay attention to the safety of people around.

5. Lift it to contact with the pad, and check the installation position of the pad again.

6. Lift the vehicle until the wheels leave the ground, and check the vehicle shaking (stability).

7. Lift the vehicle to a suitable operating position.

8. Ensure that the crane is safely locked successfully.