Cancel LaVida maintenance lamp

1. Turn on the ignition switch, hold down the "reset button 5" with one hand and turn off the ignition switch with the other.

2. Press and hold the "reset button 5" until the clock and mileage on the meter are completely off display (there should be no display on the meter and a black screen appears), and then release the button.

3. Press and hold "Reset Button 5" with one hand again, and then turn on the ignition switch again. At this point, the maintenance reminder on the instrument is flashing. Press and hold the "reset button 5" and do not release it. Release the button after the maintenance reminder does not flash.

4. Turn on the ignition switch again or start the vehicle, and check whether the disassembly is successful.

Cancel magotan maintenance lamp

Turn on the power supply, press the "kilometer reset key" on the dashboard by hand, and start the engine after the "flashing reminder" disappears, and repeat the above operations.

Insert the key into the first gear (don't charge, that is, the various indicators in the instrument panel don't light up); Then press and hold the button with the wrench mark on the lower right of the speedometer, and then push the key into the second gear with the other hand (that is, all the indicators in the dashboard are on), and then you will see the message of "maintenance now" displayed in the middle information screen; At this time, the left and right hands are respectively placed on the two buttons at the lower left of the tachometer and the two buttons at the lower right of the tachometer, and then the four buttons are pressed at the same time. At this time, you will find that the words "immediate maintenance" in the information screen have disappeared; This indicates that your setup was successful.

Cancel POLO maintenance light

First put out the fire, then press and hold the reset button (the one with the odometer cleared), then turn on the electricity with the key. Don't light the fire until several "* * * *" appear in the small wrench, and then release it.

Step 1: Insert the key.

Step 2: Press and hold the reset button under the speedometer with your left hand.

Step 3: Turn the key to the switch (non-ignition position) with your right hand.

Step 4: Turn the reset button clockwise (right) with your left hand.

Step 5: Turn off the switch.

Step 6: Just restart the car and the maintenance tips will disappear.