How far is it from Lishu County to Siping?

Question 1: How many kilometers is it from Lishu County in Jilin Province to Jiaohe River? Driving route: about 310.5 kilometers in total

Starting point: Lishu County

1. Siping City Internal driving plan

1) Start from the starting point due east, drive along Xiangyang Street for 60 meters, turn left into Jianmei Road

2) Drive along Jianmei Road for 180 meters, and turn left After about 60 meters from the east gate of Tianhui Shopping Center on the side, turn right into Fenghua Street

3) Drive along Fenghua Street for 300 meters and go straight into Fenghua East Street

4) Along Fenghua Street Drive 13.7 kilometers on Dongdajie Street, turn to the left

5) Drive 1.9 kilometers, turn to the right

6) Drive 30 meters, turn to the right

7) Drive 30 meters, turn left into G102

8) Drive along G102 for 10.5 kilometers, turn right into X053

9) Drive along X053 for 2.4 kilometers, turn right onto the ramp

2. Drive along the ramp for 1.3 kilometers and turn right to enter the Beijing-Harbin Expressway

3. Drive along the Beijing-Harbin Expressway for 66.9 kilometers towards the southeast section of the Ring Expressway/Renmin Street/Jingyue/ In the direction of the airport, turn slightly left to enter the Changchun Ring Expressway

4. Drive along the Changchun Ring Expressway for 1.8 kilometers and go straight to the Changchun Ring Expressway

5. Drive along the Changchun Ring Expressway Drive 27.2 kilometers on the expressway around the city, toward the airport/Jilin/G12, turn slightly right onto the ramp

6. Drive along the ramp for 1.0 kilometers, and go straight into the Hunwu Expressway

7. Drive 173.7 kilometers along the Hunwu Expressway. At the Jiaohe exit, turn slightly right onto the ramp

8. Drive along the ramp for 1.0 kilometers and go straight

9. In Jilin City Driving plan

1) Drive 3.3 kilometers, turn left onto Yingbin Avenue

2) Drive along Yingbin Avenue 4.6 kilometers, turn right

3) Drive 40 meters, go straight and enter Jiaohe Street

4) Drive along Jiaohe Street for 110 meters, turn right and enter Minzhu Road

5) Drive along Minzhu Road for 260 meters, turn right

6) Drive 30 meters to the end point

End point: Jiaohe City

Question 2: How far is Gujia Town, Lishu County from Siping? Driving route: Full journey About 62.0 kilometers

Starting point: Gujia Town, Lishu County

1. Start due west from the starting point, drive along Liaohe Street for 10 meters, and turn around to enter Liaohe Street

2. Drive along Liaohe Street for 970 meters and go straight into the Fourth Main Road

3. Drive along the Fourth Main Road for 40.8 kilometers and turn left into Fenghua West Street

4. Along the Drive 930 meters on Fenghua West Street, pass Xinyu Changhong Specialty Store on the right for about 60 meters, then turn right into Lishu South Road

5. Drive along Lishu South Road for 1.5 kilometers, turn right and enter Lishu South Road

6. Drive along Lishu South Road for 200 meters. At the second exit, turn left and enter Sisang Line

7. Drive along Sisang Line for 10.2 kilometers and turn slightly to the right Turn into North Xinhua Street

8. Drive along North Xinhua Street for 4.7 kilometers and go straight into South Xinhua Street

9. Drive along South Xinhua Street for 310 meters and go straight into South Xinhua Street

10. Drive along South Xinhua Street for 350 meters, take the second exit, towards Haifeng Street/Liukongqiao Road/Ziqi Road, turn left and enter South Xinhua Street

11. Drive along South Xinhua Street for 690 meters, turn right into Ziqi Avenue

12. Drive along Ziqi Road for 750 meters, cross the Sunshine Bridge, and turn left into South Yingbin Street

13. Drive along Nan Yingbin Street for 320 meters, turn right into Shifu Road

14. Drive along Shifu Road for 180 meters, turn right

15. Drive for 30 meters

, turn right

16. Drive 30 meters to the end point

End point: Siping City

Question 3: How far is it from Lishu County, Siping City, Jilin Province to Erlong Lake? Kilometer driving route: The total distance is about 62.7 kilometers

Starting point: Lishu County Housing Authority

1. Start from the starting point in the east direction, drive along the market east alley for 190 meters, and turn right to enter Chaoyang Road

2. Drive along Chaoyang Road for 110 meters and go straight into Chaoyang Nanda Road

3. Drive along Chaoyang Nanda Road for 1.5 kilometers and turn left to enter Lishu Road

4. Drive 3.3 kilometers along Lishu Road and go straight into Sili Street

5. Drive 5.6 kilometers along Sili Street, pass the Jufeng Interchange, toward Changchun, turn slightly right and enter Jufeng. Feng Interchange

6. Drive along the Jufeng Interchange for 350 meters, pass the Jufeng Interchange, turn right and enter G303

7. Drive along the G303 for 15.9 kilometers and cross Line 303 Overpass, toward Liaoyuan, turn slightly right to enter the Line 303 overpass

8. Drive 420 meters along the Line 303 overpass, go straight and enter G303

9. Drive along G303 for 21.3 kilometers, left Turn

10. Drive 770 meters, pass Beishantun on the right for about 150 meters, turn left into X053

11. Drive along X053 for 12.7 kilometers to the end (on the right side of the road Side)

End point: Erlong Lake Scenic Area

Question 4: How to drive from Siping Railway Station to Siping Lishu County: the total distance is about 17.9 kilometers

Starting point: Siping Railway Station

1. Start from the starting point in the northeast direction, drive 180 meters, turn left and enter Zhanqian Street

2. Drive along Zhanqian Street for 110 meters, right Turn ahead and enter Hero Avenue

3. Drive along Hero Avenue for 470 meters, turn right and enter Hero Avenue

4. Drive along Hero Avenue for 70 meters, and at the first exit, go towards Direction of Central West Road, turn right and enter South Xinhua Street

5. Drive along South Xinhua Street for 540 meters, then go straight into North Xinhua Street

6. Drive along North Xinhua Street for 4.6 kilometers , turn left and enter Sisang Line

7. Drive along Sisang Line for 10.1 kilometers, go straight and enter Sisang Line

8. Drive along Sisang Line for 290 meters, at the 3rd Exit, turn slightly left into Lishu South Road

9. Drive along Lishu South Road for 1.3 kilometers, turn right into Xiangyang Street

10. Drive along Xiangyang Street for 90 meters and arrive at End point (on the right side of the road)

End point: Lishu County

Question 5: How many kilometers is it from Suizhong to Lishu County, Siping City, Jilin Province? Driving route: about 538.2 kilometers in total

Starting point: Suizhong County

1. Huludao city driving plan

1) Start from the starting point in the southeast direction, drive 110 meters, turn left into Central Road

2) Drive along Central Road for 340 meters, turn left into Xinxing Street

3) Drive along Xinxing Street for 1.2 kilometers, turn slightly to the right into Wenhua Road

4) Drive 2.2 kilometers along Wenhua Road, towards Huludao/Shenyang, turn slightly right onto the ramp

2. Drive 400 meters along the ramp, and go straight onto the Beijing-Harbin Expressway

3. Drive 120.1 kilometers along the Beijing-Harbin Expressway, toward Fujin Expressway/Mingzitun Interchange/Fuxin/Siping, turn slightly right into Mingzitun Interchange

4. Drive along Mingzitun Interchange 1.0 kilometers, go straight and enter the Fujin Expressway

5. Drive 118.2 kilometers along the Fujin Expressway, pass the Wangfu Overpass, toward Shenyang/G25/Changchun/Zhangwu, turn slightly right and enter the Fuxin Interchange

6. Drive along the Fuxin Interchange for 850 meters and go straight into the Changshen Expressway

7. Drive along the Changshen Expressway for 175.7 kilometers and go straight into the Pingshan Expressway.

Kang Expressway

8. Drive 15.5 kilometers along Pingkang Expressway and go straight onto Changshen Expressway

9. Drive 66.5 kilometers along Changshen Expressway and go straight onto the ramp

10. Drive 2.7 kilometers along the ramp and go straight into the Beijing-Harbin Expressway

11. Driving plan in Siping City

1) Drive 9.0 kilometers along the Beijing-Harbin Expressway and exit at Siping/Liaoyuan , turn slightly right onto the ramp

2) Drive along the ramp for 1.4 kilometers and go straight

3) Drive 440 meters and turn left to enter the development zone road

4) Drive along the main road in the development zone for 3.7 kilometers and go straight into the main road in the development zone

5) Drive along the main road in the development zone for 200 meters and take the second exit toward Yijing Street/Overpass and go straight into Central East Road

6) Drive along Zhongyang East Road for 1.7 kilometers, turn right into Beiyijing Street

7) Drive along Beiyijing Street for 2.4 kilometers, and go straight into Beijing-Harbin Line

8) Drive along the Beijing-Harbin Line for 1.6 kilometers and turn left to the rear

9) Drive 30 meters and turn to the left

10) Drive 260 meters and turn to the right to enter Sisang Line

11) Drive along Sisang Line for 11.4 kilometers and go straight into Sisang Line

12) Drive along Sisang Line for 290 meters. At the 3rd exit, turn slightly to the left Enter Lishu South Road

13) Drive along Lishu South Road for 280 meters and turn left

14) Drive 250 meters and turn right into the fire road

15 ) Drive along the fire road for 110 meters and turn left into Shuben Street

16) Drive along Shuben Street for 170 meters and reach the end point (on the right side of the road)

End point: Siping City Lishu County Vocational High School...

Question 6: How far is the driving route from Wuhu to Lishu County, Siping City: the total distance is about 1815.5 kilometers

Starting point: Wuhu Bus Station

1. Driving plan in Wuhu City

1) Start from the starting point in the southeast direction, drive along Wenhua Road for 420 meters, turn right into Zheshan Middle Road

2) Follow Drive 770 meters on Zheshan Middle Road and go straight into Zheshan West Road

3) Drive 640 meters along Zheshan West Road and turn right into Yinhu Middle Road

4) Drive along Yinhu Middle Road 2.1 km, turn right into Tianmen Shandong Road

5) Drive along Tianmen Shandong Road for 2.5 kilometers, turn left on the ramp

6) Drive along the ramp for 1.1 kilometers, go straight into Wuhe Expressway Highway

7) Drive 5.5 kilometers along the Wuhe Expressway, cross the Biandan River Bridge, toward Ma'anshan/Nanjing/G4211, turn slightly right into Wuhu Hub

2. Drive along Wuhu Drive 1.9 kilometers from the hub and go straight into the Ning-Wu Expressway

3. Drive 70.3 kilometers along the Ning-Wu Expressway, pass the Phoenix Mountain Overpass, and head toward Nanjing Third Bridge/Nanjing West Bridge/G2501/Lukou Airport. Turn slightly right onto the ramp

4. Drive along the ramp for 1.5 kilometers, pass the Liucun hub for about 420 meters, and go straight onto the Nanjing Ring Expressway

5. Follow the Nanjing Ring Expressway Drive 65.8 kilometers on the expressway, toward Zhuzhen/Huaian/G25, turn slightly left to enter Changshen Expressway

6. Drive along Changshen Expressway for 1.4 kilometers, pass the bridge hub, and go straight into Changshen Expressway

7. Drive 48.4 kilometers along the Changshen Expressway towards Xuyi/Suqian/Xuzhou/S49, turn slightly right into Huanghuatang hub

8. Drive along Huanghuatang Drive 1.1 kilometers from the hub, pass Huanghuatang hub for about 110 meters, and go straight to Xinyang Expressway

9. Drive along Xinyang Expressway for 136.3 kilometers, pass Suqian South Hub, and head towards Xinyi/Suqian High-tech Zone /S49/G2 direction, turn slightly right onto the ramp

10. Drive along the ramp, pass Suqian South Hub for about 680 meters, and go straight into Xinyang Expressway

Road

11. Drive along the Xinyang Expressway for 64.6 kilometers, and after passing the Xinchang Railway Bridge for about 1.6 kilometers, go straight into the Duanzhai Junction

12. Drive along the Duanzhai Junction for 420 meters, after passing Duanzhai hub for about 520 meters, go straight to the Beijing-Shanghai Expressway

13. Drive along the Beijing-Shanghai Expressway for 239.0 kilometers, cross the North Xiaoyi Bridge, and head toward Zibo/Binzhou/S29. Turn left onto Binlai Expressway

14. Drive along Binlai Expressway for 830 meters, pass the Laiwu hub overpass, and go straight into Binlai Expressway

15. Drive along Binlai Expressway Drive 115.1 kilometers on the highway and go straight to the Changshen Expressway

16. Drive 57.7 kilometers along the Changshen Expressway toward Beijing/Dezhou, turn slightly left and enter the Changshen Expressway

17. Drive along the Changshen Expressway for 1.1 kilometers, pass the Shawa hub interchange, and go straight into the Rongwu Expressway

18. Drive along the Rongwu Expressway for 23.8 kilometers, cross the Xingfu River Bridge, and arrive at Wudi /Binzhou Port Exit, turn slightly right and enter Wudi Interchange

19. Drive along Wudi Interchange for 870 meters, turn left and enter S239

20. Drive along S239 for 21.5 kilometers and go straight Enter S364

21. Drive along S364 for 16.0 kilometers and go straight into S364

22. Drive along S364 for 400 meters and turn right to enter the Coastal Expressway

23. Drive along the Coastal Expressway for 46.9 kilometers, pass the Jiedi Jianhe Bridge for about 1.6 kilometers, and go straight to the Coastal Expressway

24. Drive along the Coastal Expressway for 93.5 kilometers, and go straight to the Coastal Expressway

25. Drive along the coastal highway for 160.2 kilometers, toward Shenyang/S52/G1, turn slightly right onto the ramp

26. Drive along the ramp for 1.4 kilometers, and go straight into the Beijing-Harbin Expressway

27. Drive 212.4 kilometers along the Beijing-Harbin Expressway, cross the Changshan Bridge, and head toward Fujin Expressway/Mingzitun Interchange/Fuxin/Siping, and turn slightly right to enter Mingzitun Interchange

28. Drive along Mingzitun Interchange for 740 meters. After passing Mingzitun Interchange for about 340 meters, go straight to Fujin Expressway

29. Drive along Fujin Expressway for 118.2 kilometers and pass Wangfu Overpass , towards Shenyang/G25/Changchun/Zhangwu, turn slightly right and enter Fuxin Interchange

30. Drive along Fuxin Interchange for 460 meters, pass Fuxin Interchange for about 380 meters, and go straight into Changshen Expressway

31. Long, deep and high... >>

Question 7: How far is Lishu County, Siping, Jilin, from Shaoyang, Hunan? Driving route: The total distance is about 2538.8 kilometers

Starting point: Lishu County

1. Driving plan in Lishu County

1) Start from the starting point due west, drive along Xiangyang Street for 90 meters, left Turn into Lishu South Road

2) Drive along Lishu South Road for 1.4 kilometers and go straight into Lishu Avenue

3) Drive along Lishu Road for 3.3 kilometers and go straight into Sili Street

4) Drive along Sili Street for 7.0 kilometers, turn right and enter North Xinhua Street

5) Drive along North Xinhua Street for 4.6 kilometers, turn left into Central West Road

6) Drive along Central West Road for 3.1 kilometers, turn right and enter Central East Road

7) Drive along Central East Road for 150 meters, take the second exit, turn left and enter Development Zone Road

8) Drive along the main road in the development zone for 3.8 kilometers, turn slightly right and take the ramp

9) Drive along the ramp for 490 meters, go straight and take the ramp

10) Drive 740 meters along the ramp and go straight into the Beijing-Harbin Expressway

2. Drive 9.7 kilometers along the Beijing-Harbin Expressway towards Fuxin/Jinzhou/S17/Pingkang Expressway, turn slightly right and enter the Pingkang Expressway Highway

3. Drive along Pingkang Expressway 83.

3 kilometers, turn slightly left to enter Changshen Expressway

4. Drive along Changshen Expressway for 1.5 kilometers, go straight to Changshen Expressway

5. Follow Changshen Expressway Drive 174.5 kilometers toward Jinzhou/Shanhaiguan/Qinghemen/Jingha Expressway, turn slightly right and enter Fuxin Interchange

6. Drive along Fuxin Interchange for 1.1 kilometers, pass Fuxin Interchange for about 130 meters, and go straight into Fujin Expressway

7. Drive 118.5 kilometers along the Fujin Expressway towards Jinzhou/Huludao/Beijing, turn slightly right and enter Mingzitun Interchange

8. Follow Drive 240 meters from Mingzitun Interchange. After passing Mingzitun Interchange for about 310 meters, go straight into the Beijing-Harbin Expressway

9. Drive along the Beijing-Harbin Expressway for 314.8 kilometers, cross the Douhe Bridge, and head towards Tangjin/ In the direction of Tanggang/Tianjin/Jingtang Port, turn slightly right and take the ramp

10. Drive along the ramp for 1.4 kilometers and go straight into the Tangjin Expressway

11. Drive along the Tangjin Expressway 41.7 kilometers, towards Tianjin, turn slightly left to enter Changshen Expressway

12. Drive along Changshen Expressway for 1.4 kilometers, go straight to Changshen Expressway

13. Along Drive 120.8 kilometers on the Changshen Expressway towards Daqiuzhuang/Beijing/Jinan/S60, turn slightly left into Binshi Expressway

14. Drive 850 meters along Binshi Expressway and pass Tuanbo South Interchange, go straight to Binshi Expressway

15. Drive along Binshi Expressway for 20.7 kilometers, pass Wangguantun Interchange, head toward Cangzhou/S6, turn slightly right and enter Wangguantun Interchange

16. Drive along the Wangguantun Interchange for 670 meters, and after passing the Wangguantun Interchange for about 320 meters, go straight into the Jincang Expressway

17. Drive along the Jinchang Expressway for 12.1 kilometers, pass the Dazhangtun Interchange, and go straight into Beijing Shanghai Expressway

18. Drive 51.0 kilometers along the Beijing-Shanghai Expressway, toward Cangzhou West/Shijiazhuang, turn slightly right onto the ramp

19. Drive 2.2 kilometers along the ramp, and go straight Enter the Huangshi Expressway

20. Drive 103.7 kilometers along the Huangshi Expressway, toward Hengshui/Kaifeng/G45, turn slightly right onto the ramp

21. Drive along the ramp for 1.6 kilometers, Go straight into Daguang Expressway

22. Drive along Daguang Expressway for 419.9 kilometers, towards Xuchang/S83/Nanyang/Tongxucheng District, turn slightly right and take the ramp

23. Drive along the ramp for 1.0 kilometers and go straight into Lannan Expressway

24. Drive along Lannan Expressway for 79.2 kilometers and go straight into Yongdeng Expressway

25. Follow Yongdeng Expressway Drive 26.3 kilometers toward Pingdingshan/Nanyang/S83, turn slightly left to enter Lannan Expressway

26. Drive 770 meters along Lannan Expressway, and go straight to Lannan Expressway

27. Drive 47.8 kilometers along the Lannan Expressway, toward Luohe/Wugang/G36/S49, turn slightly right onto the ramp

28. Drive 520 meters along the ramp, and go straight into the Ningluo Expressway Highway

29. Drive 3.8 kilometers along the Ningluo Expressway, toward Wugang/Tongbai/Suizhou/Yueyang, turn slightly right onto the ramp

30. Drive along the ramp 910 meters, go straight to Jiaotong Expressway

31. Go along Jiaotong Expressway...>>

Question 8: How far is it from Beijing to Lishu County, Siping City? ? Siping is not very close to Lishu County. As long as you get to Siping, you can reach Lishu County very quickly.

Question 9: How far is it from Xinmin City to Siping Lishu County? The total distance is about 240.6 kilometers

Can I get a loan just after I get out of prison?

Is Nantong Soumi Technology Co., Ltd. a liar?

[Wuhua District Company Registration] What are the requirements for the registration of popular science and Internet small loan companies?

Second-hand housing bank evaluation

Whose car was bought before marriage?

How to cancel the contract when the loan is cheated?

Is it necessary to pay back the money of Qingdao Yun Qi?

Can Huizhou borrow money from different places to buy a house?

The latest policy of Chengdu housing provident fund loan

Is Jincheng Xinying Finance real or fake?