There is no doubt that the energy saving and emission reduction machine will lose.
Under the severe situation of the international financial crisis, the demand of rubber and its additives industry is shrinking, the export is sharply reduced, the benefits are greatly reduced, and the production and operation are extremely difficult. Should we give up energy conservation and emission reduction or pay close attention to energy conservation and emission reduction? When every enterprise faces a major decision, there is great good news. The multi-effect evaporation biochemical combination process jointly developed by the National Rubber Additives Engineering Technology Research Center and Shandong Yanggu Huatai Chemical Co., Ltd. and the project "Cleaner Production Technology of Rubber Accelerator NS and Comprehensive Utilization Technology Development of Wastewater Resources" successfully passed the national appraisal. This topic was reported by China Chemical Industry News as a difficult problem of wastewater treatment in rubber additives industry. This shows that the conditions of energy saving and emission reduction in rubber and its additives industry are mature and the opportunities are rare. Time waits for no one, and what is lost will never come again.
Energy saving and emission reduction are the basic requirements for the survival and development of rubber and its additives industry. Rubber and its additives industry is the focus, difficulty and social focus of energy saving and emission reduction. In recent years, the state has stepped up efforts to solve this problem and achieved remarkable results. However, affected by the financial crisis, the phenomenon of high energy consumption and high pollution has risen again. In order to fundamentally solve this problem, the state has issued supporting industrial revitalization plans, including the rubber industry, taking energy conservation and emission reduction as the basic requirements for the development and revitalization of the industry. The state and governments at all levels have successively issued industry standards, supporting laws, regulations and policies and measures for energy conservation and emission reduction, strengthened supervision and management of energy conservation and emission reduction, and strengthened evaluation and assessment of target responsibility for energy conservation and emission reduction. Last year, China's chemical oxygen demand emissions decreased by 4.2%, and sulfur dioxide emissions decreased by 5.95%. This year, chemical oxygen demand emissions decreased by 2. 1%, and sulfur dioxide emissions decreased by 2.7%. This has led to a major reshuffle in the rubber and its additives industry. The development and revitalization of energy conservation and emission reduction, and the closure of polluting energy sources. It can be seen that energy conservation and emission reduction is not a short-term behavior to deal with the financial crisis, but a fundamental solution to ensure the long-term development and revitalization of the industry. Therefore, on the issue of energy conservation and emission reduction, we must not hesitate, be vague or hesitate. Otherwise, you will miss the opportunity and sit still.
Energy saving and emission reduction is the basic way to reduce the cost and improve the competitiveness of rubber and its additives industry. In the first quarter of this year, the national energy consumption per unit of GDP decreased by 2.89% year-on-year, and the decline increased by 0.27 percentage points year-on-year. In the face of the international financial crisis, China Petrochemical Group Corporation reduced costs and improved efficiency by saving energy and reducing emissions. Last year, the comprehensive energy consumption per 10,000 yuan output value decreased by 2.4%, and the efficiency increased by more than 654.38+0.5 billion yuan. Last year, China Petroleum saved 0.92 million tons of standard coal/kloc-0 and 63.88 million cubic meters of water, and completed 1.84 pollution reduction projects. The cleaner production technology of rubber accelerator NS and the comprehensive utilization technology of wastewater resources jointly developed by the National Rubber Additives Engineering Technology Research Center and Shandong Yanggu Huatai Chemical Co., Ltd. will make the wastewater treatment capacity reach 1000 tons/day, the water utilization rate is as high as 90%, and 90,000 cubic meters of water can be saved every year. At the same time, a large number of inorganic salts can be recovered, effectively inhibiting soil salinization, which has great economic and social benefits. The reality shows that energy saving and emission reduction is the basic way for rubber and its additives industry to cope with the financial crisis, reduce costs, improve efficiency and enhance market competitiveness. Therefore, energy conservation and emission reduction must be firm and brave.
Energy saving and emission reduction is the basic policy for rubber and its additives industry to cope with the financial crisis and realize the revitalization and development. The state and governments at all levels have issued a number of economic policies that are conducive to energy conservation and emission reduction, actively promoting circular economy and accelerating the development of energy conservation and environmental protection industries. For example, green credit is implemented, and loans are pledged with sewage and garbage disposal fees, giving preferential loan interest rates. The central government increased financial input and financial support for energy conservation and environmental protection projects, and 210 billion yuan of the national 4 trillion yuan economic stimulus plan was used for energy conservation and emission reduction. Last year, the central government allocated 27 billion yuan of special funds for energy conservation and emission reduction. This year, we will continue to increase capital investment and support ten key energy-saving projects and key industrial pollution control projects. Therefore, energy saving and emission reduction is an important part of the good use policy, full use policy and flexible use policy of rubber and its additives industry, and it is also a revitalization road to cope with the financial crisis and achieve sound and rapid development.
Energy saving and emission reduction are the basic guarantee for rubber and its additives industry to cope with the financial crisis, adjust and optimize the structure, and improve the technical content and added value. In order to improve the scientific and technological content and innovation ability of rubber and its additives industry, the state has introduced a number of measures. National Rubber Additives Engineering Technology Research Center is an incubator for technology development and innovation in the whole industry. The center gives full play to the functions of scientific and technological cohesion and radiation; The main force and leading role of research on major topics of industrial development; R&D projects and promotion functions; Industry information function; Industry norms and standard functions; Industry inspection and testing function, and achieved a number of scientific and technological achievements. The energy-saving and emission-reduction technology project independently developed by our center has achieved many innovations in the combined process of multi-effect evaporation and biochemistry: the high, medium and low loads in the biochemical process are obviously separated by using the composite biological oxidation method, which improves the biochemical treatment effect and shortens the contact oxidation time. The specific bacteria biological contact oxidation process has strong impact load resistance, good sludge settling performance and easy solid-liquid separation and operation management; Titanium alloy with strong corrosion resistance and good heat transfer performance is selected for the heater, and HPP plastic material with strong corrosion resistance and low price is selected for the steam-water separation room to improve the corrosion resistance of the equipment, prolong the service life of the equipment and minimize the failure rate of the equipment; Using salt purification technology, the organic matter in the produced inorganic salt can be effectively separated. After inspection, the treated sodium chloride can meet the technical requirements of chlor-alkali industry and realize the recycling of valuable components in wastewater. Classifying production wastewater and domestic wastewater is beneficial to the reuse of industrial wastewater after treatment, reducing sewage discharge and treatment cost; The microorganisms in the compound biochemical section of this process can be cultivated and domesticated, and suitable specific bacteria can be screened out, which greatly improves the treatment efficiency; Evaporation water reuse technology is adopted to reuse evaporation water as workshop process water, which realizes the reduction of wastewater discharge and the reuse of water resources. Through solvent extraction, solvent and organic matter can be separated by distillation, and the solvent can be reused. The purified residual salt meets the requirements of GB/T 5462-2003 Industrial Salt and can be used in industrial production. Rubber and its additives industry should make full use of the national rubber additives engineering technology research center as a scientific research platform, seriously promote the application of scientific and technological innovations, accelerate the transformation into practical productivity, improve the technical content and competitive strength of the industry, and realize the high-quality revitalization of the industry in response to the financial crisis.