1, change of running inertia
This is a common mistake in test drive. For example, when turning, sudden braking or sudden throttle may cause the vehicle to lose control and endanger safety.
Overtaking is out of control.
Overtaking is often mistaken for following the preceding car in order to let the preceding car move forward, but in fact, when the car slows down, if it is too close to the preceding car, it may get out of control and even hit the preceding car.
Step 3 step on the accelerator too much
This is a common trap. In the process of test drive, you may forget to brake and step on the accelerator too quickly, resulting in the vehicle losing control and an accident.
4. It's late to change lanes
Sometimes in order to catch up with the team, the test driver mistakenly thinks that he can change lanes quickly. In fact, it takes several steps to change lanes, and the situation may be unstable at this time.
5. The degree of grasping the slope is not enough
When driving on a slope, the core of controlling the car is to grasp the degree. If the speed is not enough and the acceleration is too fast, the car may get out of control and endanger safety.
6. Incorrect parking method
If the parking mode is incorrect, such as the front of the car is tilted and the tires are separated from each other, it will easily lead to various dangerous situations.
7. Pay attention to tire tracks
Vehicles that are often used for test drive can be identified by tire wear marks.
8. Pay attention to the price
The test drive will be relatively cheaper, no doubt, but be careful not to be too cheap, otherwise it will take a long time.
9. Chronic failure
When purchasing, check whether the engine, site and metal area are rusted. If there is rust on the surface, it is a rainforest car after a long exposure.
10, whole
Observe the degree of vehicle wear and check whether the documents are complete. Test drive is usually a loan. If the certificate has not been issued when you buy it, it is mostly a trap.