3C List of Test Documents for Compulsory Certification Products
The following information should be provided when testing and sending products: sample sending registration form; Details of CCC application; Product description; Product specifications; Product maintenance manual; Product circuit diagram (including schematic diagram and printed circuit layout); Description of the difference between the main delivery model product and the coverage model product in the same application unit; List of key components related to product safety and list of main components affecting electromagnetic compatibility; Copy of certification certificate of key safety components of the product; CB test certificate and report of the product (if any); Power of attorney for the use of product trademarks (if any);
CCC certification application steps
1. Submit an application for intention to the designated certification body, which shall include the following contents: applicant information and manufacturer information, such as name, address, contact person, contact information, etc. Manufacturer's information (including quality system status and system certification, etc.). ); Product name, model, specification, trademark, etc. ; In addition, it is necessary to provide relevant information of the product, such as: product manual, operation and maintenance manual, product assembly drawing, working (electrical) schematic diagram, circuit diagram, component configuration drawing, product safety performance inspection report, safety key parts list, etc. For customs declaration and inspection, if the products applied for are electrical products, electromagnetic compatibility type tests shall be conducted and the following technical data shall be supplemented: 1. Technical standards for electromagnetic compatibility; 2. Description of product changes that may affect safety performance; Customs affairs forum 3. EMC performance test report of the product (provided by the model); 4. List of all EMC key components with EMC requirements. If the products applied for customs declaration and inspection, foreign exchange verification, export tax rebate and customs clearance consultation are changes of certified products, or are related to certified products, the applicant shall explain them in the application form. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation II. In principle, apply according to the model. Products of the same model produced by different manufacturers or products of the same model produced by the same manufacturer in different locations should be applied separately. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation 3. After reviewing the application materials, CCC certification body divides the product units together with the subcontracting laboratory. After reaching an agreement with the applicant on the standards, testing items and the number of samples required, the subcontracting laboratory declares the product testing fees to CCC. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation 4. CCC certification bodies and business representatives will determine the audit days of the manufacturer's quality system, and determine the corresponding system audit fees according to the manufacturer's quality system status. Customs affairs forum. CCC certification body sends CCC product certification quotation to the applicant. The quotation includes details such as certification fee, product name and model, testing standard and sample quantity. 6. After the applicant signs and seals the quotation and returns, CCC certification body issues a task notice to the business representative, entrusts the business representative to sign a certification contract with the applicant, and issues a formal application to the applicant. The application includes the supplementary materials, the responsibilities of the applicant and the quality system questionnaire to be attached. 7. When the following conditions are met, that is, entering the sample testing stage, CCC certification body will send a task notice to the relevant sub-contracted laboratories, informing them that they are ready to receive samples for testing: Customs Forum 1. After the applicant fills in and signs and seals as required, return the quotation, formal application form and product certification contract; 2. The applicant has submitted all the required application materials; 3. The applicant has sent the sample to the designated place according to the sample delivery form; 7. The applicant shall pay the relevant fees in the way agreed in the contract. When the applicant fails to meet the above requirements in time, resulting in time delay and increased certification cycle, the responsibility shall be borne by the applicant. All materials submitted by the applicant should be written in Chinese, and foreign applicants can use English. The Product Certification Department of CCC Product Certification Center of Customs Forum also accepts product certification requests from foreign applicants, and the procedures and requirements are the same as those of domestic applicants. 2.CCC certification type test 1. The type test is based on the standards stipulated by CCC Product Certification Center. 2. In principle, the type test shall be sent by ZZHY to the designated CCC product certification center branch laboratory for testing. However, the applicant may apply for on-site inspection of large goods that are inconvenient to transport, install and debug, or apply for on-site inspection of other nearby inspection institutions or factories recognized by CCIBLAC. In order to carry out on-site inspection, the inspection site shall meet the specified conditions, including: 1. It is necessary to inspect instruments, equipment and places on site; 2. The precision and range of instruments and equipment shall meet the relevant requirements of on-site inspection items; Customs affairs forum 3. Relevant instruments and equipment shall be regularly verified and traceable to national or international standards; Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation 4. Having environmental conditions and power grid conditions that meet the on-site inspection standards of China; Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation. 5. Have personnel familiar with standards and operations. In general, under the supervision of qualified testers designated by CCC Product Certification Center, the applicant will arrange technicians to carry out the test operation as required and issue original test records. CCC testers are responsible for sorting out and writing test reports. 3. For the series products or variant products of the basic products that have been applied for and passed the type test, only the related items different from the basic products are tested. 4. In the process of testing, if testing items are added, the relevant laboratory shall notify the product certification department of CCC Product Certification Center, and the product certification department shall notify the applicant to pay the testing fee before testing. 5. Inspection results If the inspection results of some inspection items are unqualified but easy to improve, they can be sent back for inspection after improvement. If there is another unqualified item, it is judged as unqualified. After passing the type test, the subcontracted laboratory will issue a type test report, and the product certification department of CCC Product Certification Center will issue a notice of qualified sample test results to the applicant. Issue unqualified notice to unqualified products. Applicants can reapply after half a year. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation; 6. After the sample inspection, the subcontracting laboratory of CCC Product Certification Center issues a "sample collection notice" to the applicant who needs to retrieve the sample. The applicant shall go through the formalities of sample collection at the designated place within one month after receiving the Notice of Sample Collection. If it is not handled within the time limit, the samples of overseas manufacturers shall be handed over to China Customs for processing, and the samples of domestic manufacturers shall be handed over to the subcontracting laboratory for processing. If the sample fails to pass the customs declaration and inspection, the Product Certification Department of CCC Product Certification Center will send a Notice of Unqualified Sample Inspection to the applicant and explain the items and inspection results of the sample that do not meet the standard, or send a Notice of Supplementary Sample Inspection and inform the applicant to pay the expenses required for supplementary inspection. For products that have received the Notice of Unqualified Sample Inspection, the applicant may apply again. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation. Factory customs forum quality system inspection 1. The implementation of factory quality system inspection is generally carried out after the samples are qualified. The purpose of factory quality system inspection is to check whether the production and testing conditions of the factory can ensure the continuous and stable production of products that meet the standards. Customs declaration and inspection. The headquarters of CCC Certification Center takes the manufacturer questionnaire as the document basis for the manufacturer review team to know the manufacturer's situation before arriving at the manufacturer. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation 3. CCC product certification center headquarters organized a review team to the factory for review. On the basis of ISO9000 international quality management system standards, the audit work has increased the professional audit of safety-related design, procurement, inspection, testing and test equipment, and conducted on-site verification and sampling inspection of safety key parts. Customs declaration and inspection, foreign exchange verification, export tax rebate and customs clearance consultation can be exempted from the quality system audit of production enterprises that have obtained quality system certification, but professional audit of the above safety factors must be supplemented, and daily supervision can also be combined. Customs declaration and inspection. The issuance and use of product certification certificates and certification marks, customs declaration and inspection 1, issuance and inspection 1. For manufacturers who have obtained the quality management system certification, CCC product certification business representatives will fill in the certification approval form in time after the samples are qualified. And attach the audited enterprise application, manufacturer's questionnaire, manufacturer's examination and confirmation, ISO9000 quality system certification certificate and sample type test report and other documents, and report to CCC certification center headquarters. After passing the qualification review, the director of CCC Certification Center will issue a "product certification certificate" and announce the certification status regularly, and then arrange a "supplementary safety factor" audit in combination with the daily supervision of the quality system. Customs affairs forum ii. For the production enterprises that have not obtained the quality system certification certificate, after the sample testing and the quality system review of the production enterprises are qualified, the CCC product certification business representative shall fill in the product certification approval form in time, and attach the verified enterprise application form, the production enterprise questionnaire, the production enterprise review confirmation, the factory review report, the spot check record and the sample type test report to the CCC certification center headquarters. After passing the qualification review, the director of CCC Certification Center will issue the Product Certification Certificate, which will be published regularly. Customs declaration and inspection. Certification mark management products can only be affixed with CCC safety certification mark after obtaining CCC product certification certificate. Signs can be: customs declaration, inspection)-purchased from the certification center and pasted near the product nameplate; Customs declaration, inspection-or application to certification center, after approval, will be printed on the nameplate or molded on the product. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation. The manufacturer shall effectively control the use of signs and establish a ledger to record their purchase and use. Customs declaration and inspection a) Applicants who purchase safety signs apply to the certification center to purchase signs, which should include: 1) applicants, manufacturers and contacts; 2) customs declaration and inspection, foreign exchange verification, export tax rebate and customs clearance consultation 2) product name and model; 3) The serial number of CCC product certification certificate obtained by the product; 4) the number of purchase signs; Customs declaration and inspection 5) the payment method and issuance method of the applicant; 5) Customs declaration and inspection; 6) Company seal or authorized person's signature. The customs declaration and inspection applicant can also obtain an application form for purchasing marks from the certification center, fill it out and return it to the certification center. If it is an agent purchase, the applicant's power of attorney must be attached. You need to pay the logo fee to buy the logo. The certification center sends the mark to the applicant or the applicant directly receives the mark. After the printed/molded logo product has obtained CCC product certification, the applicant may apply for printing CCC safety label on the product nameplate or molding logo on the product. The application submitted by the applicant to the certification center shall include the following contents: 1) applicant, manufacturer and contact person; Customs declaration and inspection. x！ H4C)D8s & amp； C 2) product name and model; Customs declaration and inspection 3) the serial number of CCC product certification certificate obtained by the product, with a copy of the certificate if necessary; 4) Factory number: molded or printed design pattern; 6) Company seal or authorized person's signature. Customs declarers and inspectors can also collect them at the certification center? Apply for printing/molding marks? , please fill in and return it to the certification center together with the stamping or printing design. The certification center shall review the application for logo printing/molding put forward by the applicant according to the following requirements: 1. The format and content of the nameplate shall be the same as that sent when applying for certification; 2. The pattern of safety signs should be the same as CCC signs or enlarged/reduced in proportion; And the size should not be too small to be recognized. Customs declaration and inspection. Under the safety sign, there should be the manufacturer number or certification certificate number corresponding to the product. If the design of the customs forum does not meet the requirements, the certification center will inform the applicant and point out the corresponding change measures. Applicants can reapply after changing the design pattern. After the design meets the requirements and is approved by the certification center, the applicant will send the 10 nameplate (or copy) to the certification center, and pay the examination and approval fee for printing/molding logo. Issued after approval by the certification center? Notice of Permission to Print/Die Print Signs V. Follow-up inspection and customs declaration supervision and management after obtaining the certificate. The purpose of follow-up inspection and supervision and management after inspection and certification is to accurately and comprehensively grasp the situation of the certified applicant/manufacturer and its products, supervise the certified applicant/manufacturer to correctly use the CCC certification mark, and ensure that the products entering the market always meet the relevant standards for applying for certification. The production and testing conditions of the applicant/manufacturer always comply with the relevant provisions of the product certification system of CCC Certification Center to protect the rights and interests of consumers. Daily inspection and supervision CCC product certification certificate does not indicate the validity period, and the validity period of the certificate is maintained by daily inspection and supervision. The certification center entrusts the designated inspection agency that signed the follow-up inspection agreement with it to follow up the inspection of the production enterprises that have obtained the product certification certificate and are allowed to use the products with the "certification mark". The frequency of inspection shall not be less than once a year. Follow-up inspection can be combined with supervision and review of CCC quality system certification. The inspection result is qualified and the certificate continues to be valid. 2. Suspend/resume the use of the certification mark. If the manufacturer's quality system or the product safety items sampled on site fail to pass the inspection, CCC Certification Center will notify the applicant to suspend the use and seal up the unused certification marks. When the applicant requests to resume the use of the certification mark, he shall submit a written application to CCC Certification Center, which will notify the applicant to resume the use of the certification mark after reinspection of the manufacturer or sample. 3. Customs declaration and inspection of certified product changes. When the production and testing conditions of the production enterprise, key components of product safety, product structure and other factors affecting product safety change, the applicant shall submit an application for change to CCC in time, and the CCC certification mark can only be used after the CCC certification center has reviewed the data and approved the sample testing (if necessary). If the production of the product has stopped, or for other reasons, the applicant can provide the certificate of revocation of license to the certification center. After being approved by the State Administration of Inspection and Quarantine, the certification center will issue a notice of revocation of the certificate to the applicant.