Time cannot be seen or touched. Just when you are not paying attention, it has quietly passed you by. Looking back at the achievements of the past period, it must carry a lot of our achievements. With all the hard work and sweat, let’s make a summary of this year’s work. The following is the 2022 production safety self-inspection report that I compiled for you. You are welcome to read it.
2022 Safety Production Self-inspection Report 1
In order to further implement the Oil Transportation Safety Document No. 20__254: "Notice on Carrying out Safety Production Inspection Activities", and further strengthen safety production management , do a good job in safety and environmental protection work during this special period and critical moment, fundamentally curb the occurrence of accidents, and ensure the realization of safety production goals this winter and next spring. The material supply and marketing company carried out a major safety production inspection based on its own actual situation. The inspection results are now reported as follows:
1. The leadership pays attention and the responsibility is assigned to everyone. After receiving the notice from the company, the leaders attached great importance to it, chaired relevant meetings, and set up an inspection team. The section chief was personally responsible for checking the implementation of responsible leadership, line responsibilities, and territorial management, and assigned the responsibility for safety production in our unit to In practice, in accordance with the principle of "whoever benefits is responsible, who is in charge, who is responsible, whoever checks is responsible", clarify the responsibilities of self-inspection, ensure the time of self-inspection, the implementation of self-inspection results, and seriously study and solve outstanding problems in safety production , to ensure the implementation of safety production responsibilities and the implementation of safety production preventive measures. We must truly avoid going through the motions and leave no dead ends. We must stop production if safety is not ensured and ensure safe reproduction.
2. Implement the "eight prevention" measures for safe production in winter, further strengthen drivers' operating skills, review the "three prohibitions", strengthen drivers' awareness of safe driving, and resolutely curb winter road traffic accidents occurrence. We also go deep into the grassroots level to understand the actual situation, prepare winter anti-freeze insulation and anti-skid material reserves in advance, and prepare emergency plans for safe production in winter.
3. According to the drastic changes in winter weather, employees should strengthen their winter safety knowledge. When severe weather such as ice, snow, slippery roads, heavy fog, etc. occurs, every employee must pay attention to safety when commuting to and from get off work. After get off work, check all doors and windows and whether fire exits are closed to ensure the safety of property in the office area and various warehouses.
4. Actively carry out the "Four No's" activities to ensure the participation of all employees, joint management, clear responsibilities, and strive to ensure that there are no personal violations, no hidden dangers in the position, no violations in the team, and no accidents at the grassroots level . Further improve the anti-"three violations" mechanism and strengthen risk management.
5. Strengthen winter safety knowledge and education, organize all employees to strengthen the education of winter safety production operating procedures, enhance the effectiveness of safety education and training, and further improve the safety production awareness and self-prevention of all employees consciousness. Strengthen winter safe driving education for drivers, improve safety awareness and comprehensive quality, and formulate a detailed winter training plan.
6. Classified storage and management by library. Each warehouse manager is responsible for classifying and managing warehouses according to the usage and attributes of each material, counting and inspecting them in a timely manner, and achieving daily and monthly settlements. It is necessary to prevent damage to the product caused by factors such as the large temperature difference between indoors and outdoors in winter.
7. Increase measures for winter production safety emergency plans. Rain and snow are more frequent in winter, and bad weather such as heavy fog is more common. Early prevention, early deployment, and early implementation are necessary to ensure that not one inch of pipeline, equipment, or employee is frostbitten.
This self-examination activity has achieved certain results, which has further enhanced the awareness of winter production safety among all employees. Various safety production precautions have been further implemented accordingly, but there are still certain problems. We will do our best to implement the principle of "unsafe production, stop production if unsafe" and do a good job in the safety production work of our unit. .
2022 Safety Production Self-inspection and Self-inspection Report 2
In order to implement the spirit of the document and the According to the requirements, our company attaches great importance to proactive responses and seriously carries out self-examination and self-correction activities. The implementation of self-examination and self-correction is summarized as follows:
1. Strengthen organizational leadership and conscientiously carry out self-examination and self-correction activities
The company organized a comprehensive safety inspection. The inspection was personally led by manager Zhu Jinping, and included the engineering director Yang Yugang, quality inspection director Du Guangjian, safety officer Liu Dongbo and a safety inspection team composed of project managers, construction workers, quality inspectors and safety officers. Some of the problems found during the inspection are as follows: < /p>
(1) The wires at the construction site are messy, the distribution box has no door, no lock and no warning signs.
(2) There is no fire-fighting equipment in the entire construction site.
(3) Some managers and workers did not wear safety helmets.
(4) When welding, do not wear protective masks as required.
(5) The steel bar processing shed did not have an operating procedures sign. Corresponding corrective measures are proposed for this:
(1) The wiring of the distribution box should be standardized according to the requirements, and the distribution box should be covered, locked and hung with warning signs.
(2) The project department actively purchases fire-fighting equipment.
(3) Provide pre-job education to construction workers and require them to wear safety helmets, safety belts and other protective equipment.
(4) Strengthen safety training for special operations personnel and strictly follow safety technical briefings during construction.
2. Establish rules and regulations, improve management, and implement safety responsibilities
(1) The project department should sign a safety production responsibility letter with each construction team that enters the site one after another, Ensure that project safety responsibilities are implemented at all levels.
(2) Establish a safety and quality management system headed by the project department manager, formulate and improve safety and quality management regulations and process standards, ensure that project construction is in compliance with rules, and ensure horizontal inspection To the edge, lengthwise to the end, leaving no dead ends. Implementation at every level, strict treatment of root causes, and elimination of potential safety hazards at the construction site in the bud.
3. Strengthen safety education and training, strengthen on-site management
Improve safety awareness, ensure that safety responsibilities are implemented by people, adhere to pre-job training, and all staff entering the site must Technical training and level 3 safety education are carried out. Only those who pass the examination can be employed. The project department should regularly provide safety training, lectures, on-site guidance and other forms to employees to create a strong safe production atmosphere. For special operations personnel, they should contact the technical department to organize unified training to ensure that they can work with certificates for special types of work.
4. Strengthen emergency drills
The project department establishes an emergency rescue organization, prepares emergency rescue plans, stipulates emergency rescue team members and their responsibilities, and organizes regular emergency drills.
In future construction, we will continue to strengthen learning, increase on-site management efforts, assign responsibilities to people, and strive to achieve the goal of zero safety accidents. We will also carefully summarize and accumulate experience and lessons in each project, conscientiously implement the company's safety system, treat safety as a top priority, and do a good job in safe production.
2022 Production Safety Self-inspection and Self-inspection Report 3
According to Yunshui Safety Supervision No. 4 "Emergency Notice of the Provincial Department of Water Resources on Carrying out Special Inspections on Production Safety of Water Conservancy Projects Under Construction" and the state The Construction Section of the Water Conservancy Bureau issued a telephone notice on March 12, requesting that our bureau combine the water conservancy production safety inspection carried out in the first quarter of this year and the safety production inspection activities organized by the county to quickly implement the document and promptly convey the spirit of the document to all parties under construction. For water conservancy projects, the Construction Administration Bureau of the Small (I) Reservoir Risk Removal and Reinforcement Project and the Nibaizu Reservoir Expansion Project Management Bureau are required to carry out construction management of Pingdi, Dutian, Yeqilian, Muma River, Gaoqiao, etc. For 8 small (1)-type dangerous reservoir risk relief and reinforcement projects, such as Xingfu, Daxing Blood Factory, and Weidi, and Nibaizu Reservoir expansion project, we conducted a comprehensive self-inspection item by item based on the inspection content, and filled in the information truthfully. Self-check list. The summary is as follows:
1. Strengthen publicity and improve safety awareness
We follow the principle that "leading the safety production work is the key, sound organization is the foundation, responsibility is in place is the focus, and the group With the idea of ??"preventing and controlling groups is the purpose", we should make good arrangements and deployments, and regard the implementation of safe production as an important task, and conduct the same research, deployment, inspection and implementation with business work. Actively carry out publicity and education on production safety regulations in conjunction with the "Year of Safety Production" activities. With the theme of "managing hidden dangers and preventing accidents", we went deep into various construction units and widely publicized the purpose and significance of safe production in water conservancy project construction, thereby improving the safety awareness and safety quality of construction personnel and enhancing their sense of responsibility and mission for safe production. We always adhere to the policy of "safety first, prevention first, comprehensive management", insist on inspection and rectification at the same time, and insist on tracking and implementing the problems found, thus ensuring that all work measures are implemented and laying a solid foundation for ensuring project safety. Good foundation.
2. Improve the system and implement safety production responsibilities
In order to effectively fulfill the safety production responsibilities of each project under construction, each engineering administration department has a safety production and contract management department, which is dedicated to Supervise the safety production work of each reservoir project construction. At the same time, each reservoir project project department has a safety production management office, which is responsible for the on-site safety management responsibilities of each project. The Administration also formulated the work responsibilities of the Safety Production Management Section and the Safety Production Management Office of each project department accordingly. During the construction process, the safety production management personnel strictly implemented various regulations on safety production and management at all levels and put safety production first. , regularly and irregularly inspect the project safety production management work, implement safety production responsibilities, and ensure the safety of engineering personnel, construction safety, and quality safety.
3. Work together to ensure that all parties involved in the construction perform their duties conscientiously
Safety production management is an important guarantee during the construction process. First, with safety, the project can Will produce benefits. In the work of safety production, all parties involved in the construction perform their respective safety production responsibilities. The builder represents the owner and is fully responsible for safety production management. The designer is responsible for design safety. The supervisor is responsible for the safety of the entire project implementation process. Production supervision responsibilities, and the construction unit, as the direct implementer of the project, has direct responsibility for its exercise and implementation. Therefore, during the project implementation process, only when all parties involved in the construction cooperate and cooperate with each other can production safety work be fully implemented.
Since the start of the water conservancy project under construction in our county, all parties involved in the construction have performed their respective safety production functions, creating a safe and efficient construction environment for project implementation.
Project legal entity. In order to effectively fulfill the safety production responsibilities of the water conservancy projects under construction in our county, the Nibaizu Reservoir Expansion Engineering Bureau and the Small (I) Reservoir Engineering Management Bureau have set up a safety production and contract management department to specialize in the safety production of various reservoir project constructions. Supervise the work. At the same time, each reservoir project project department under construction has a safety production management office, which is responsible for the management responsibilities of each safety production site. The Administration also formulated the work responsibilities and production safety management system of the production safety management section and the production safety management office of each project department accordingly. During the construction process, the production safety management personnel strictly implemented various regulations on production safety and management at all levels, and Safety production is given top priority, and project safety production management work is inspected regularly and irregularly to implement safety production responsibilities and ensure the safety of engineering personnel, construction safety, and quality safety.
Engineering survey and design unit. Chuxiong Prefecture Water Conservancy and Electric Power Survey and Design Institute is responsible for the preliminary design of the eight small (one) reservoir risk removal and reinforcement projects under construction in our county, and seven of the technical facility designs are undertaken by Chuxiong Xinyuan Water Conservancy and Hydropower Survey and Design Co., Ltd. One piece (Dutian Reservoir) is undertaken by Qujing Nengyang Water Conservancy and Hydropower Survey and Design Co., Ltd.; the Nibaizhu Reservoir expansion project is undertaken by Chuxiong Prefecture Water Conservancy and Electric Power Survey and Design Institute. During the several stages of the design process, each design unit strictly followed the relevant national design specification requirements and safety production regulations, and was equipped with corresponding safety production facilities. Especially in the design of the tunnel, it is equipped with steel supports and shaft locks, which effectively reduces safety hazards and provides a source of funds for safety facilities.
Project supervision unit. In order to ensure the safe production of the project, each engineering bureau will write the safety production management clause into the contract when signing the supervision contract with the supervision unit, and strictly implement the national safety production and management regulations in accordance with the requirements, ensuring the safe construction of the project.
Construction unit. The construction unit is the main body responsible for safety production. In order to ensure the safety of project construction, when signing the construction contract, the Engineering Bureau signed the project safety production contract in strict accordance with the three-contract system, and strictly followed the water conservancy construction specifications and safety production management regulations to strengthen Construction safety management. Each construction unit has a work safety license, and all special types of workers work with certificates, and there is no case of work without a certificate. During the construction period, construction management personnel are regularly or irregularly organized to participate in various safety production training and assessments, construction personnel are organized to conduct safety production education, and construction personnel are equipped with various labor protection supplies in accordance with labor protection systems and regulations, and they are used normally. And strictly implement the water conservancy safety production and "three simultaneities" system.
4. The formulation and implementation of project construction plans, safety technical measures, and the investigation and management of potential safety hazards
There are ***9 key water conservancy projects under construction in our county, including Nibaizu Reservoir expansion project and 8 small (1) reservoir risk removal and reinforcement projects. Among them: the construction of the Nibaizu Reservoir expansion project started on October 21, and an investment of 51.05 million yuan has been completed so far; the Pingdi Reservoir started in March and was completed in August; Gaoqiao, Dutian, Mumahe and Yeqilian Four The construction of the Jiujiang Reservoir started in October and was completed in October; the construction of the Weidi, Xingfu and Daxuetan reservoirs started in February and is currently under construction. All parties participating in the construction of each project strictly abide by national, provincial and state laws and regulations on production safety management, conscientiously perform safety functions, implement production safety responsibilities, and do a good job in safety production. There have been no engineering safety accidents since the start of construction.
Since the three reservoir projects of Weidi, Xingfu and Daxuechang reservoirs only started in February, we are currently organizing the excavation of the flood control embankment foundation and dam slope foundation of Weidi Reservoir, Xingfu and Daxuechang Reservoirs. Since the technical design is not yet in place, only control measurements and reviews have been carried out on the main project. Therefore, in accordance with the spirit of this document, the Small (I) Engineering Bureau carefully inspected the construction organization design reported by the construction unit, and the construction plan and safety technical measures were It has been formulated and relatively complete. The safety hazards of the ancillary projects such as the foundation excavation of the Weidi Reservoir and the access road to the Daxuechang Reservoir were investigated, and the unsafe factors were rectified in a timely manner, and the construction unit of the Daxuechang Reservoir was required to Submit fire prevention deposits to the forestry authorities in a timely manner to prevent and prevent fires in advance.
5. Existing problems and next work plans
Although a lot of work has been done since the construction of various water conservancy projects under construction in our county, through this safe production, After investigating the situations that usually occur during the construction management process, the main shortcomings are as follows: First, some construction workers entered the construction site without wearing safety helmets, causing safety hazards; second, the project safety inspection records were not standardized and many safety precautions were taken. Matters have been raised during the inspection, but records have not been compiled in a timely manner, and trace management needs to be strengthened.
Safety production work is a major event in project construction and is also the primary task of project construction. Only with the active cooperation and full cooperation of all parties involved in the construction can we do a good job in safety production work and ensure project safety. Personnel safety and quality safety. In the future work, we will focus on strengthening production safety management from the following aspects: First, strengthen the leadership of production safety management, unify thinking, and raise awareness.
Conscientiously implement the spirit of the national, province-wide, and state-wide production safety work conferences and fully implement safety production responsibilities. The second is to carry out in-depth safety production inspections and increase efforts to rectify hidden dangers. Make timely rectifications on discovered safety hazards and supervise their implementation. Relevant personnel of projects that are not completely rectified will be registered and reported according to the bad behavior recording system. The third is to adhere to the long-term mechanism of special rectification actions and hidden danger investigation and management, and continue to carry out safety production work in every project and every person responsible for safety production, so as to ensure that no dead ends are left in the investigation, no future troubles are left in the rectification, and all aspects of safe production are ensured. This work has achieved practical results.
2022 Self-inspection and Self-inspection Report on Production Safety 4
In order to further strengthen production safety, combined with Xingcheng City People’s Hospital Document No. 20__45: "About Doing a Good Job in Self-inspection and Self-inspection of Production Safety and "Notice", further strengthen safety production management, do a good job in safety maintenance work during the current special period and critical moments, fundamentally curb the occurrence of accidents, and ensure the personal safety of hospital material property, staff and patients. Based on its own actual situation, the General Affairs Section has conducted a major inspection of safety hazards related to the maintenance of the General Affairs Section. The inspection results are now reported as follows:
1. According to the severe weather changes in summer, the rainy season is coming, and safety knowledge should be strengthened. Take anti-slip measures on the road surface, and every employee should pay attention to safety when commuting to and from get off work. After get off work, check all doors, windows, and fire exits to ensure the safety of property in the office area and various warehouses.
2. Classified storage and management by library. Each warehouse manager is responsible for classifying and managing warehouses according to the usage and attributes of each material, counting and inspecting them in a timely manner, and achieving daily and monthly settlements. It is necessary to prevent damage to the product caused by factors such as the large temperature difference between indoors and outdoors in winter.
3. Electrician maintenance workers must have a safety guardian when working with live electricity or climbing for maintenance. If the power needs to be cut off, someone must be left guarding the switch to prevent someone from accidentally sending power and endangering personal safety.
4. Three potential safety hazards were discovered during this inspection
1. The pressurized water tank for fire protection on the 11th floor of the outpatient building has slight cracks in the bottom corner due to age. If it is not repaired in time, It may cause rupture and requires prompt repair.
2. The high-voltage box substation located on the east side of the hospital has not been maintained and inspected for many years due to the inability to have power outages in the hospital and the need for professional technicians. Once the mechanical parts are worn and aged, normal power supply will not be available.
3. In the case of a possible failure of the high-voltage box transformer and a power outage in both lines, the hospital should prepare a 500KW generator for emergency use. Otherwise, if there is a power outage during surgery or serious illness, the consequences will be disastrous.
This time, various safety production precautions of the General Affairs Section have been further implemented accordingly, but there are still certain problems. We will do a good job in the safety production work of the General Affairs Section through hard work.
2022 Production Safety Self-Inspection Report 5
In order to implement the "Notice", learn lessons deeply, fully implement the main responsibilities of enterprises, investigate and eliminate hidden dangers in production safety, our bureau immediately An inspection was conducted on the decoration and decoration projects under construction in the county, and the inspection results are now reported as follows:
1. Overall situation
New decoration and decoration projects in our county in 20__** *9 projects, of which 7 have been completed and 2 are under construction (__ County Mengyin Village Bank Business Building Decoration Project, __ County Meng Medical General Hospital Preparation Room Purification Decoration Project), with an area of ??3352㎡ and a construction cost of 5.23 million yuan.
2. Supervision and Inspection
1. Implementation of basic construction procedures. The above two projects under construction have not implemented basic construction procedures, and there are no construction drawings that have been reviewed and no construction permits. phenomenon, failing to provide the qualifications of participating units and personnel employment certificates.
2. Project quality and safety situation. There are major structural changes in the purification and decoration project of the preparation room of the Mongolian General Hospital. Party A has been asked to calculate the construction load; the materials on site are piled up in a disorderly manner, and some temporary electricity is connected randomly. Phenomenon.
3. Regarding the performance of relevant personnel at the construction site, the safety production management personnel of the construction company and supervision company were not on duty and failed to perform their safety production management responsibilities.
Up to now, our bureau has carried out 3 comprehensive quality and safety inspections. Regarding the above existing problems, our bureau has issued a rectification notice to require the construction party to rectify as soon as possible. If the rectification is qualified, the supervision unit will review it. Report to our bureau for inspection.
3. Next step of supervision measures
(1) Improve ideological understanding; further enhance the sense of responsibility and urgency to do a good job in safety production in construction, and conscientiously carry out safety production and safety in the field of construction Conduct project quality inspections and strictly implement various systems and measures. Implement a supervision model that combines fixed-point inspections and inspections of key parts and key links. In addition to supervision of required inspection items in accordance with regulations, supervision and inspections are also conducted according to progress to strictly control project quality and safety.
(2) Strictly implement the main responsibility of the enterprise for quality and safety production; strengthen the lifelong responsibility for quality, strictly supervise the implementation of the main responsibility of the enterprise for safety production, implement the safety responsibility of the grassroots project department, and refine it to every aspect of the construction site Technical links and job operators; further strengthen safety measures and strictly implement the construction plan; supervision units perform their duties and supervise rectifications immediately when hidden dangers are discovered, and implement safety laws and regulations, standards and specifications, various systems and preventive measures to projects, teams and positions and frontline operators.
(3) Comprehensive investigation and rectification; further increase law enforcement supervision, carry out special inspections of construction safety production and project quality, carefully analyze the weak links and high-accident types of construction safety production work, and take targeted measures Measures should be taken to investigate and rectify potential safety hazards, so as to ensure that there are no blind spots, no formalities, and comprehensive coverage. We will intensify the investigation and punishment of violations of laws and regulations, and order projects with major safety hazards or safety accidents to stop work for rectification.
Related articles on the 2022 production safety self-inspection report:
★ The latest 10 articles on the 2022 production safety self-assessment
★ 5 articles on the 2022 safety work summary report
★ 2022 Safety Production Work Summary Sample (10 general articles)
★ 2022 Safety Production Monthly Work Summary Report 10 articles
★ 2022 Safety Production Work Summary Report
★ 2022 Work Safety Inspection Report
★ 10 Selected Work Summary of 2022 Work Safety Month
★ 6 Sample Work Safety Reports
★ 10 annual work summaries on production safety in 2022
★ 10 personal work summaries on production safety in 2022, the latest edition