If you want to apply for 3C certification, you need to call 1 14 to inquire about local or nearby institutions with 3C certification qualifications.

In addition, as a compulsory product certification system, the process of 3C certification is very strict, and the staff will go to the company's office for on-the-spot investigation and audit. After being certified as qualified, proceed to the next operation in written form.

First, CCC certification application steps

1. Submit an application for intention to the designated certification body, which shall include the following contents:

Applicant information, manufacturer information, such as name, address, contact person and contact information.

Manufacturer's information (including quality system status and system certification, etc.). );

Product name, model, specification, trademark, etc. ;

In addition, you need to provide information about the product, such as? Product description, operation and maintenance manual, product assembly diagram, working (electrical) schematic diagram, circuit diagram, component configuration diagram, product safety performance inspection report, safety key parts list, etc. Customs declaration and inspection? If the applied product is an electrical product, it is necessary to carry out an electromagnetic compatibility type test, and the following technical data need to be supplemented.

1. electromagnetic compatibility technical standard;

2. Description of product changes that may affect safety performance; Customs affairs forum

3. Product EMC test report (model provided);

4. List of all EMC key components with EMC requirements. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation.

If the product applied for is a change of the certified model product or is related to the certified product, the applicant shall explain it in the application. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation.

2, in principle, according to the model to apply. Products of the same model produced by different manufacturers or products of the same model produced by the same manufacturer in different locations should be applied separately. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation.

3.CCC certification body shall, together with the subcontracting laboratory, review the application materials and divide the product units. After reaching an agreement with the applicant on the required standards, testing items and sample quantity, the subcontracting laboratory shall declare the product testing fees to CCC. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation.

4.CCC certification bodies shall work with business representatives to determine the audit days of the manufacturer's quality system, and determine the corresponding system audit fees according to the manufacturer's quality system status. Customs affairs forum

5.CCC certification body sends CCC product certification quotation to the applicant. The quotation includes details such as certification fee, product name and model, testing standard and sample quantity.

6. After the applicant signs and seals the quotation and returns, CCC certification body issues a task notice to the business representative, entrusts the business representative to sign a certification contract with the applicant, and issues a formal application to the applicant. The application includes the supplementary materials, the responsibilities of the applicant and the quality system questionnaire to be attached.

7. When the following conditions are met, that is, entering the sample testing stage, CCC certification body will send a task notice to the relevant sub-contracted laboratories to inform them to prepare to receive samples for testing:

Customs forum 1. After the applicant fills in and signs and seals as required, return the quotation, formal application form and product certification contract;

2. The applicant has submitted all the required application materials;

3. The applicant has sent the sample to the designated place according to the sample delivery form;

4. The applicant shall pay the related expenses in the way agreed in the contract.

When the applicant fails to meet the above requirements in time, resulting in time delay and increased certification cycle, the responsibility shall be borne by the applicant. Customs declaration and inspection

8. All materials submitted by the applicant should be written in Chinese, and foreign applicants can use English. Customs forum?

The Product Certification Department of CCC Product Certification Center also accepts product certification requests from foreign applicants, and the procedures and requirements are the same as those of domestic applicants.

Second, CCC certification type test

1. The type test is based on the standards specified by CCC Product Certification Center.

2. In principle, ZZHY will send the samples to the designated CCC product certification center for subcontracting laboratory, but the applicant can apply for on-site inspection of large goods that are inconvenient to transport, install and debug, or other neighboring inspection institutions or factories recognized by CCIBLAC. For on-site inspection, the inspection site shall meet the specified conditions, including:

) d% v&\-| * a "z customs declaration, inspection 1. Having the necessary instruments, equipment and venues for on-site inspection; Customs declaration and inspection

2. The precision and range of instruments and equipment shall meet the relevant requirements of on-site inspection items; Customs affairs forum

3. Relevant instruments and equipment shall be regularly verified and traceable to national or international standards; Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation.

4. There are environmental conditions and power grid conditions that meet China's on-site inspection standards;

Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation.

5. Have personnel familiar with standards and operations.

In general, under the supervision of qualified testers designated by CCC Product Certification Center, the applicant will arrange technicians to carry out the test operation as required and issue original test records. CCC testers are responsible for sorting out and writing test reports.

3. For the series products or variant products of the basic products that have been applied for and passed the type test, only the related items different from the basic products are tested. Customs declaration and inspection

4. In the process of testing, if testing items are added, the relevant laboratories shall notify the product certification department of CCC Product Certification Center, and the product certification department of CCC Product Certification Center will notify the applicant to pay the testing fee before testing.

5. Test results

If the test results of some test items are unqualified, but easy to improve, it can be allowed to send samples for inspection again after improvement. If there is another unqualified item, it is judged as unqualified. After passing the type test, the subcontracted laboratory will issue a type test report, and the product certification department of CCC Product Certification Center will issue a notice of qualified sample test results to the applicant. Issue unqualified notice to unqualified products. Applicants can reapply after half a year. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation;

6. After the sample inspection, the subcontracting laboratory of CCC Product Certification Center issues a "sample collection notice" to the applicant who needs to retrieve the sample. The applicant shall go through the formalities of sample collection at the designated place within one month after receiving the Notice of Sample Collection. If it is not handled within the time limit, the samples of overseas manufacturers shall be handed over to China Customs for processing, and the samples of domestic manufacturers shall be handed over to the subcontracting laboratory for processing.

If the sample fails to pass the customs declaration and inspection, the Product Certification Department of CCC Product Certification Center will send a Notice of Unqualified Sample Inspection to the applicant and explain the items and inspection results of the sample that do not meet the standard, or send a Notice of Supplementary Sample Inspection and inform the applicant to pay the expenses required for supplementary inspection. For products that have received the Notice of Unqualified Sample Inspection, the applicant may apply again. Keywords customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation,

Three. Manufacturer's Quality System Inspection Customs Affairs Forum

1, the manufacturer's quality system inspection is generally carried out after the sample is qualified. The purpose of factory quality system inspection is to check whether the production and testing conditions of the factory can ensure the continuous and stable production of products that meet the standards.

Customs declaration and inspection. The headquarters of CCC Certification Center takes the manufacturer questionnaire as the document basis for the manufacturer review team to know the manufacturer's situation before arriving at the manufacturer. Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation.

3.CCC product certification center headquarters organized a review team to the factory for review. On the basis of ISO9000 international quality management system standards, the audit work has increased the professional audit of safety-related design, procurement, inspection, testing and test equipment, and conducted on-site verification and sampling inspection of safety key parts. Keywords customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation,

For the manufacturers who have obtained the quality system certification, the quality system audit of the manufacturers can be exempted, but the professional audit of the above safety factors must be supplemented, and daily supervision can also be combined. Customs declaration and inspection

Four. Issuance and use of product certification certificates and certification marks

Customs declaration and inspection 1, issue product certification certificate.

Application for customs declaration and inspection 1. For manufacturers who have obtained the quality management system certification, after the samples are qualified, CCC product certification business representatives should fill in the certification approval form in time, and attach the audited enterprise application form, manufacturer questionnaire, manufacturer review confirmation, ISO9000 quality system certification certificate and sample type test report to CCC certification center headquarters. After passing the qualification review, the director of CCC Certification Center will issue the "Product Certification Certificate".

Customs affairs forum ii. For the production enterprises that have not obtained the quality system certification certificate, after the sample testing and the quality system review of the production enterprises are qualified, the CCC product certification business representative shall fill in the product certification approval form in time, and attach the verified enterprise application form, the production enterprise questionnaire, the production enterprise review confirmation, the factory review report, the spot check record and the sample type test report to the CCC certification center headquarters. After passing the qualification review, the director of CCC Certification Center will issue the Product Certification Certificate, which will be published regularly. Customs declaration and inspection

2, certification mark management

After obtaining CCC product certification, the product can be labeled with CCC safety certification mark. Signs can be: customs declaration, inspection)

-Buy from the certification center and stick it near the product nameplate;

Customs declaration, inspection-or application to certification center, after approval, will be printed on the nameplate or molded on the product.

Customs declaration and inspection, foreign exchange verification, export tax rebate, customs clearance consultation. The manufacturer shall effectively control the use of signs and establish a ledger to record their purchase and use.

Customs declaration and inspection a) Applicants who purchase safety signs apply to the certification center for the purchase of signs, and the application contents shall include:

1) Applicant, manufacturer and contact person;

2) customs declaration and inspection, foreign exchange verification, export tax rebate and customs clearance consultation 2) product name and model;

3) The serial number of CCC product certification certificate obtained by the product; ? 4) the number of purchase signs;

Customs declaration and inspection 5) the payment method and issuance method of the applicant;

5) Customs declaration and inspection; 6) Company seal or authorized person's signature.

The customs declaration and inspection applicant can also obtain an application form for purchasing marks from the certification center, fill it out and return it to the certification center. If it is an agent purchase, the applicant's power of attorney must be attached. You need to pay the logo fee to buy the logo. The certification center sends the mark to the applicant or the applicant directly receives the mark.

After the printed/molded identification products have obtained CCC product certification, the applicant can apply for CCC safety identification.

Printed on the product nameplate, or the logo is molded on the product. The applicant shall submit an application form to the certification center, which shall include the following contents:

1) Applicant, manufacturer and contact person; Customs declaration and inspection. x！ H4C)D8s & amp； c

2) Product name and model;

Customs declaration and inspection 3) the serial number of CCC product certification certificate obtained by the product, with a copy of the certificate if necessary;

4) Factory number:

Molded or printed design patterns; Customs declaration and inspection

6) Company seal or authorized person's signature.

Customs declarers and inspectors can also collect them at the certification center? Apply for printing/molding marks? , please fill in and return it to the certification center together with the stamping or printing design. The Certification Center shall examine the application for logo printing/molding put forward by the applicant according to the following requirements:

1. The format and content of the nameplate shall be consistent with the nameplate sent when applying for certification;

Customs declaration and inspection. The pattern of safety signs shall be the same as CCC signs or enlarged/reduced in proportion; And the size should not be too small to be recognized. Customs declaration and inspection

3. Under the safety sign, there should be the manufacturer number or certificate number corresponding to the product.

If the design of the customs forum does not meet the requirements, the certification center will inform the applicant and point out the corresponding change measures. Applicants can reapply after changing the design pattern. After the design meets the requirements and is approved by the certification center, the applicant will send the 10 nameplate (or copy) to the certification center, and pay the examination and approval fee for printing/molding logo. Issued after approval by the certification center? Notice of Permission to Print/Mould Marks

Verb (abbreviation of verb) Follow-up inspection and supervision after obtaining the certificate.

The purpose of follow-up inspection and supervision and management after obtaining the customs declaration and inspection certificate is to accurately and comprehensively grasp the situation of the certified applicant/manufacturer and its products, supervise the certified applicant/manufacturer to correctly use the CCC certification mark, and ensure that the products entering the market always meet the relevant standards for applying for certification, and the production and testing conditions of the applicant/manufacturer always meet the relevant provisions of the product certification system of CCC Certification Center to protect consumers' rights and interests.

Daily inspection and supervision of customs affairs forum

The validity period of CCC product certification certificate is not indicated, and the validity period of the certificate is maintained through daily inspection and supervision. The certification center entrusts the designated inspection agency that signed the follow-up inspection agreement with it to follow up the inspection of the production enterprises that have obtained the product certification certificate and are allowed to use the products with the "certification mark". The frequency of inspection shall not be less than once a year. Follow-up inspection can be combined with supervision and review of CCC quality system certification. The inspection result is qualified and the certificate continues to be valid.

2. Suspend/resume the use of the certification mark.

If the product safety items examined by the manufacturer's quality system or sampled on site fail to pass the inspection, CCC Certification Center shall notify the applicant to suspend the use and seal up the unused certification marks. When the applicant requests to resume the use of the certification mark, he shall submit a written application to CCC Certification Center, which will notify the applicant to resume the use of the certification mark after reinspection of the manufacturer or sample.

3. Customs declaration and inspection of certified product changes.

When the factory production and testing conditions, key parts of product safety, product structure and other factors affecting product safety change, the applicant shall submit an application for change to CCC in time, and the CCC certification mark can only be used after the CCC certification center conducts data review and sample testing (if necessary) approval. If the production of the product has stopped, or for other reasons, the applicant can provide the certificate of revocation of license to the certification center. After being approved by the State Administration of Inspection and Quarantine, the certification center will issue a notice of revocation of the certificate to the applicant.

4. When a manufacturer that has not produced certified products for more than one year continuously produces certified products, the applicant must report to CCC Certification Center.

In any of the following circumstances, the CCC product certification certificate shall be revoked and the CCC certification mark shall be withdrawn: Customs Forum

For products that have obtained product certification, it is found that two batches of models are unqualified in safety performance, and the product structure does not conform to the certified products.

The samples sealed by the factory are unqualified after inspection (including expanded sampling review);

Customs declaration and inspection? The applicant uses the certification mark on unapproved products without authorization.

CCC Certification Center issued the announcement of revoking product certification certificate. If the certificate is revoked, the applicant can reapply after six months. ?

Give you pictures and texts! -