1. Assemble the antenna and install the tuner: install and connect the antenna and tuner according to the instructions (the general seller will help you press the pan, including the elevation angle).
2. Cable: Connect the cable on the set-top box with the cable on the TV.
3. According to the antenna elevation inquired in the preliminary preparation work; Adjust the elevation and azimuth of the antenna; Elevation: scale ≈- 22；; If the offset feed angle has been corrected on the scale on the antenna, the inquired angle is used; Bearing: due south by west.
To set parameters:
1. Press the Menu button on the remote control to enter the Main Menu interface and select System Settings.
2. Enter the password "9999".
3. Select "Installation and Signal Detection" (default selection) in the "System Settings" interface, and press the "Confirm" key of the remote controller twice. Stand behind the satellite antenna and let the front of the satellite antenna rotate slowly from due south to the satellite direction (it is recommended to rotate at a slower speed than the second hand of the watch). Pay attention to the changes of "signal strength" and "signal quality" in the debugging interface of satellite receiver on TV at all times during the rotation process, and stop when the signal turns green, indicating that the satellite has been initially identified and locked.
4. Network connection settings. IP setting:114.251.156.067, port setting: 4567 or 04567.
5. The area code is set to the first six digits of the local ID number.
6. Turn off the power of the set-top box, insert the mobile phone card and smart card, and then turn it on.
7. Select "Base Station Information" in the system settings and press OK.
8. Wait for the satellite to automatically search for mobile base station information. According to the signal strength of the base station, the base station information will be listed automatically.
9. Wait for the base station information to pop up, and the scanned base station information will appear on the TV. Click the orange button "Save and Confirm".
10. In the channel screen, the dialog box "Smart card is not opened, do you want to install it? Select OK to install, and then select Return to Play Free Programs. Press OK to open and install it.
1 1. A message box will automatically pop up later, prompting "Sending succeeded". After exiting the menu, you will be prompted "Please wait … for installation" in the upper right corner of the screen, and "Installation successful" will pop up automatically after 2-3 minutes. If this message pops up, please wait patiently for about 10 minutes.
12, the program will be played automatically later, and the authorization is completed.
Matters needing attention
Elevation and azimuth will be slightly different in different areas. Generally, when buying, the seller will help adjust the elevation angle and tell the general orientation, so it will be easier to install.