1. Positive pulp
CCW is positive pulp.
2. Looking down at the direction of rotation
The abbreviation of CCWcounter-clockwise means counterclockwise rotation.
The abbreviation of CWclockwise means clockwise rotation.
3. Specific instructions
These two signals are used to connect to the motor driver. CW/CCW is a double-pulse working mode. Both lines output pulse signals. CW is forward rotation. Pulse signal, CCW is a reverse pulse signal, usually output in differential mode. The phase difference between the two signals is 90 degrees. The direction of rotation is determined according to the phase lead or lag. The number of pulses determines the motor rotation angle.
The direction/pulse signal is a single pulse. The pulse signal sends out pulses to determine the rotation angle of the motor. The direction signal is a level signal. For example, if you want to rotate forward, add high level, and if you want to rotate reverse, add low level. .When the motor rotates in one direction, this signal maintains the original level and does not need to be changed. Extended information
Servo CW/CCW motor parameters:
AC: 220~240V50/60Hz≤4W2.5/3r/minCW/CCW working voltage is AC AC220V, frequency is 50Hz The input power is less than or equal to 4 watts W, and the rotation speed is 2.5 rpm/min.