Check: whether the drain pipe is down, whether the position of the drain pipe is too high, whether the drain pipe is blocked and whether the drain pipe is too long.

Solution: According to the model and brand of the washing machine, contact the after-sales service department of Sanyo washing machine to carry out maintenance inspection on the drainage system and drain valve of the washing machine, as long as the foreign matter in the drain valve is cleaned up or the fault can be eliminated by washing wool residue.

Extended data:

Sanyo drum washing machine fault code:

E 1 1。 The water inflow is abnormal, and the set water level has not been reached for 20 minutes.

E 12, abnormal drainage, drainage did not reach the reset water level for 8 minutes.

U8 1, in the most moderate dehydration, unable to dehydrate normally for 6 consecutive times.

U3。 The quirk of dehydration is abnormal. In the final dehydration process, after three adjustments, the eccentricity value is still greater than 12.

U4。 The door lock was abnormal, and it was unlocked three times in a row, three times in a row.

EF2。 There is no zero-crossing interrupt signal, and no zero-crossing signal can be detected for 8 seconds.

EH 1, the motor is not started, and the speed signal is abnormal. No speed feedback signal was detected within 30 seconds.

EH2。 The motor works abnormally, and the speed does not drop after stopping for one minute.

EC2。 Abnormal temperature sensor, short circuit or open circuit.

EA 1, water level sensor is abnormal.