There are similar suction cup locks, the name of the freezer lock, sliding glass cabinet fork lock, cabinet lock and so on.

High-quality freezers all evaporator tubes are made of high-quality copper coils and processed into a wide surface shaped. Stainless steel plate surface finish is good, the whole plate thickness is uniform, the use of appropriate thickness not only to ensure a long service life, but also to make the appearance of the freezer flat and sturdy. Copper tube is better than aluminum tube or composite tube of the cold transmission effect, better corrosion resistance.

High-quality copper coil has the advantages of high cleanliness inside the tube and fewer tube joints, which can effectively prevent the refrigeration system from internal leakage or clogging failure. The round tube is processed into a rectangle, so that the contact between the evaporator tube and the inner liner that transmits cold is changed from point contact to surface contact, which enlarges the transfer area and can speed up the refrigeration speed.

Related Information

1. Setting up the cabinet should be placed on a flat floor cooler, although the use of the environment is better. Do not lie down horizontally. Place the placement of the indoor environment should be well ventilated, dry, top from the ceiling in more than 50cm cooler, left and right sides from other objects more than 20cm cooler, in front of more than 20cm from other objects.

2. Newly purchased or moved after the arrangement of the cabinet should be static 2 to 6 hours before starting. Before use, the first 2 to 6 hours of empty cabinet power running downtime can not be started immediately after the need to wait more than 5 minutes, so as not to burn the compressor. General refrigerator thermostat gear according to the season, ambient temperature, the use of appropriate adjustments.

3. Summer thermostat placed in 5 "or 6" is more appropriate; spring and fall, the thermostat is placed in 3 "or 4" is more appropriate. Refrigerator use, should minimize the number of times to open the door, shorten the time to access the food. Hot food needs to be cooled to room temperature before being put into the freezer. For inter-cooled air-cooled freezers, when keeping food, the food should not be too close to the air vents.