You can also set the router to connect every 5 minutes with these options

Question 2: What's wrong with wireless routers that often disconnect? I hope the following methods can help you.

You first confirm that the WIFI signal connected to the router will be disconnected, or from the router's 1/2/3 interface wiring to the computer will also be disconnected.

1. If you are only connecting to a WIFI connection, you can adjust the wireless channel of the router's interface as follows:

Log in to the router's 192.168.0.1 interface and click on the menu "Advanced Settings" - "Wireless Settings". "Wireless Settings" - "Wireless Basic Settings", here, you change the router's wireless signal name (SSID), such as can be changed to Tenda11, etc.," "Wireless Network Mode" to "Wireless Network Mode" to "Wireless Network Mode" to "Wireless Network Mode". Wireless network mode" to "11b/g mixed mode" "channel" choose 1, 6, 11, these three channels, less interference, more stable, set up after clicking "OK! After setting, click "OK", and then open the menu "System Tools" - "Restart Router", after restarting the data can be saved successfully.

2. If you are disconnected from wireless or wired Internet access, you can open your browser to 192.168.0.1, click on "Advanced Settings" - WAN Rate Control, choose 10M half-duplex for broadband below 4M, 10M full-duplex for 4-10M, 100M half-duplex for 10M-20M, 100M half-duplex for 20-100M, and 100M half-duplex for 20-100M. If you want to use 100M full duplex for 20-100M, click OK. Click System Tools - Restart Router.

Super easy to install the interface of the router

Wireless dropped:

1. Open the browser in the URL bar to enter 192.168.0.1 to enter the router setup interface, click on the system management - wireless channel to 4, click OK, click on the restart of the device

Wired wireless are dropped:

Enter the router setup interface, click on the system management - WiFi channel to 4, click on OK, click on restart device

Wired wireless are dropped:

Enter the router setup interface Click System Management---Restart the router to try

Thank you for your support of our products, wish you a smooth work and happy life!

Question 3: What's wrong with using the router to access the Internet at home? How to solve the problem From the point of view of the problem you described, the router itself is not stable. The only thing I can think of is that the router is unstable, and that's the main reason for the dropouts.

Changing the router is a good choice. Wreckage is also less than 100, but also with wireless 。。。。。 （

Question 4: How is the home router often disconnected Either the quality of the router is unstable, or the network operator's network is unstable. The router is a little more likely,

Buy a professional wireless router, it is estimated that your router is the operator to send a free

Question 5: How to solve the problem of old disconnections after the computer is connected to the router ah This is a small disadvantage of the broadband router. Through the actual test of the speed of the network proved that the ADSL access to the computer between the installation of broadband routers, in the case of multiple computers online at the same time, due to the router in the address resolution, routing and distribution of the delay, the actual speed to reach the computer than a single directly into the ADSL line to be a little slower, or difficult to log on to the web. Of course, we can also use the following methods to minimize this loss, that is, to change the router's MTU value. MTU is the abbreviation of Maximum Tran *** ission Unit, which means the maximum packet of data transmitted on the network, the unit is bytes. The MTU value is different for different access methods, and if the value is too large it will generate a lot of packet fragmentation, increasing the packet loss rate and reducing the network speed. We usually use the broadband PPPoE connection, its MTU value is the largest 1492, the solution is to gradually lower it until the network is the most normal.

So how do you determine which MTU value is best?

Enter the DOS environment (Start -> All Programs -> Accessories -> Command Prompt), enter the following command line: ping -f -l 1492 192.168.1.1.

Note: where "192.168.1.1" is the IP address of the gateway (router IP), different routers have different IP addresses. If there is a message: Packet needs to be fragmented but DF set, it means the MTU value is too big! If the message And if it appears: Reply from 192.168.1.1: bytes=1492 time>

Problem 6: The router is always disconnected, so please teach the experts how to solve it :Sometimes there is a big difference between a few seconds and a few seconds, then it's fine:

The big difference you are referring to is the red cross If so, there are only 2 situations where it happens

1 The network cable is too big for the router, and the router is too big for the network. p> Question 7: What should I do when my router is always disconnected? WIN7 system is the problem of settings, is not set up. Before there is a computer is set up on the computer side of the DNS server, you said the situation, said about ten minutes to drop the line, unplugged and then installed on the good, the past a look at the DNS is specified, is not set up correctly.

On the computer side of the computer IP properties set full automatic access, including DNS servers are automatic. If it is the school network cable what need static IP or something, that is the static IP into the router Internet access way static IP. if it is their own home on the line, it is even more certain that the computer side of the IP fully automatic.

Methods: Remember to empty the router, restore the factory reset to be good, how to empty: long press the router's small button, 10 seconds or so, observe the indicator light is all lit is empty. You can also use it to set up a new router for your computer, or to set up a new router for your computer, or to set up a new router for your computer.

Question 8: The router is always disconnected how I set up this way (XP), for your reference (Telecom network):

A, wiring:

1, the network cable plugged into the router's WAN port;

2, the computer network cable from the router's LAN port to connect to the computer.

Second, the telecom wireless router setup method.

1, to the network connection, cancel the "broadband connection" as the default connection; point to the local connection, right-click, Properties, select: Automatically obtain the IP address, DNS servers, OK;

2, in the IE enter: 192.168.1.1 (look at the bottom of the routing logo), account, password. admin Login to the router to set up: 192.168.1.1 (see the bottom of the routing logo), account number, password:

3. Setting up the wireless router:

I. Basic wireless network settings: 1. Turn on the wireless function; 2. Turn on the SSID broadcasting. Wireless network security settings ：Enable security settings and use WPA-PSK/WPA2-PSK AES encryption methods. 1, Select: WPA-PSK/WPA2-PSK ; Authentication type: Automatic; Encryption algorithm: AES; Setting: PSK password: "*******" add your own;

Second, the network parameters: 1, WAN port settings: WAN port connection type: PPPoE; 2, the second connection : Disable; 3, the corresponding connection mode: automatic connection;

Third, DHCP server: Enable; Save, restart the router. Should the computer, WIFI can be online.

If you have solved the problem, please adopt in time, thank you!

Question 9: What if the router's WiFi always drops out? The computer does not stop the network, just router WiFi a moment to drop a moment to drop, and the speed of the network when fast Recently, I saw a lot of small partners in the feedback, their wifi how to always drop the line, just connected shortly after the automatic drop, on the last online sadness, today we say how to rule out the problem of frequent wifi drop.

2

First of all, when you use wifi, after a few frequent dropouts, then go restart the router!

Just unplug the router and plug it in again.

Or log in to the router, under "System Tools", select "Reboot Router"

The wifi connection is too much, the router on the market is wireless, theoretically, there is no limit to the number of client connections, but in reality, it's not the only thing that can be done.

These are the first time I've seen a wireless router connect with 10-20 devices.

The wifi password is leaked, causing the wifi to be used by others, so change the wifi password at this time.

Log in to your router and change the password in "Wireless Settings" under "Wireless Encryption".

Modify the wifi name ssid

Log in to your router and change the ssid name under "Wireless Settings"

Modify the wifi channel

If you have a lot of wifi signals, and too many wifi signals on the same channel, this can lead to interference with the settings. accept wifi signal interference, resulting in dropped calls.

Log in to your router and change the settings under "Wireless Settings"

The router has been working for a long time and the temperature is too high, which makes the hardware unstable.

At this point, you should use your hands to detect if the router is too hot.

This is the first time that a router has been used for a long time, and the second time that a router has been used for a long time.

Place the router in a ventilated area, turn off the router, and wait for the router temperature to decrease before using it.

Add fans, heat sinks, and so on.

Modify the wifi encryption mode to achieve the most compatible state.

Please select wpa encryption mode if it is not compatible.

Usually, we recommend choosing "wpa/wpa2"

Modify the wifi network mode

We recommend choosing the 8.02 b/g/n mode

In a wifi environment, if a device drops out of the network frequently on a certain day, and none of these devices drop out of the network, then the problem is with that one device, not with the other one. problem with that one device, not a wifi problem.

If the device doesn't support the encryption mode of the wifi, the quality of the device itself is the problem.

Finally, if your wifi is still dropping out, you can restore your router to its factory settings and set up a new router.

Turn off all router security features and firewalls.

Question 10: Why does the wireless router always disconnect, and then reconnect First of all, look at the router power supply there is no poor contact or, this may be hungry router reasons, but also may be the operator's server reasons, if it is the daily drop, and change into a laptop dial-up Internet does not fall, that is the router has a problem, it is recommended to change a laptop directly dial-up Internet also fall is the operator's problem, find the operator

This is the first time that you have a problem with your router. The problem of the carrier, find the carrier