1. Before using the thermometer, the head of the thermometer should be disinfected with alcohol.

2. Press the switch, and the buzzer will immediately beep for about 2 seconds.

3. Then the monitor shows the last measured temperature, and the well lasted for about 2 seconds. Then the "℃" symbol on the display screen flashes, indicating that the thermometer is being tested. If the room temperature is higher than 32℃, the "℃" symbol of the thermometer will keep flashing.

4. Put the thermometer under your armpit or in your mouth to measure your body temperature. When measuring body temperature, the temperature value rises gradually and the symbol "℃" flashes continuously.

5. When the temperature rise rate is less than 0. 1℃ in 16 seconds, the "℃" symbol stops flashing, and at the same time, the thermometer gives a buzzer sound for about 5 seconds. At this time, the thermometer can read the displayed temperature value after measurement.

6. The thermometer has the function of automatic shutdown, and it will automatically shut down within 10 minute after the measurement. However, in order to prolong the battery life, users are advised to press the power button to turn off the power supply after the measurement.

Usage of AoYuanyuan intelligent electronic thermometer

1. Scan the QR code on the box or visit the website to download and install the mobile terminal application software for free.

2. Open the mobile terminal application software and turn on Bluetooth.

3. Take out a piece of medical double-sided adhesive tape, tear off the bottom protective film and stick it on the bottom of the main machine to ensure that the medical double-sided adhesive tape is basically concentric with the temperature sensor. (The medical double-sided adhesive tape shall not cover the temperature sensor).

4. Tear off the top protective film

5. Stick the host computer in the center of the armpit to ensure that the temperature sensor is close to the armpit skin.