Camera structure includes: imaging elements, darkroom, imaging media and imaging control structure.

The function of the corresponding structure: the imaging element for imaging, small holes, electromagnetic coils, etc. in a particular device have played the role of the "lens"; darkroom for the lens and the imaging medium to provide a connection between the imaging medium and to protect the imaging medium from interference; the imaging medium is responsible for capturing and recording images. Including negatives, CMOS, etc.; imaging control structure can change the way the imaging or recording image to image the final imaging effect.

Extended information:

Camera Maintenance

1, the lens of the maintenance and cleaning

The lens is the camera's most critical and the most fragile components, so the camera should be extremely careful when using the camera. Usually use the camera should pay close attention to the protection of the camera lens, do not easily stained with dust, and do not let the lens was dirty hand "finger", only when very necessary to clean the lens. In the cleaning, it is best to use a balloon to blow off the dust, or use a soft brush to gently brush off.

2, LCD screen protection

Color LCD screen is very easy to be scratched by hard objects, especially without a protective film of the color LCD screen is more fragile, any scratches, will leave permanent traces, so when in use, you can consider affixing the use of the PDA or cell phone protective film, so as to protect the color LCD screen has a very good role. Also pay special attention to avoid high temperature damage to the color LCD.

3, the use of batteries and maintenance

Reflex cameras generally use nickel-metal hydride batteries or lithium batteries as a power source. Nickel-metal hydride batteries will produce a memory effect, this effect will reduce the total capacity of the battery and the use of time, with the passage of time, the storage charge will be less and less, therefore, you should try to use up all the power before charging. Care should be taken to maintain the integrity of the battery's insulating skin, and once a break is found, it should be glued in place with transparent tape.

Baidu Encyclopedia - Camera