Spraying method: this method is similar to the car refinishing paint, the raw materials used are similar. The first atomic gray priming, drying, grinding, spray primer, then drying, grinding, and finally spray top coat. The advantage of this repair method is that the cost is lower, if the spray is good, the repair is not easy to be found. The disadvantage is a little longer repair parts are easy to yellow discoloration, peeling off.

Glue method: first of all, let the glass bottle inside and outside completely dry, and then wipe clean the bottle cracked parts, and then in the cracks on the acid transparent structural adhesive (do not need to be too thick, in order not to affect the bottle smooth the best, as far as possible to play wider). If it is convenient to do the same glue on the cracked mosquito inside the bottle, it is better. In short: whether the bottle is transparent or not will not affect the beauty of the bottle can also be very good to seal the leakage.