1: The process of tattooing is divided into two steps: secant and atomization, but a very important procedure is often overlooked, that is, planning.

2. A good tattoo work must have a good composition before the correct secant. Many people, even professional tattoo artists, will cut lines too shallow or too thin, or the lines will be blurred, which is the result of incorrect instruments or tattoo methods.

If you want to weave thick, black and even lines, you have to use professional tattoo machine, but you also have to master the appropriate methods.

3. Atomization is what we call coloring. Another method is to move back and forth from side to side like the nozzle of a printer, and gradually develop outward. At the beginning, the output is heavier, the power becomes lighter gradually, and fog similar to gradient layer can also be formed.

Carefully adjust the length of the tattoo machine needle, because the length of the needle determines the thickness of the line.

Generally speaking, excessive adjustment should be avoided:

Extended data

Tattooing precautions:

1. After tattooing for three to four hours, wash the tattooed area with warm water, then dry it with a sanitary towel, keep it dry and clean it every day. You can only take a bath, not a bath.

2. Do not apply any ointment other than tattoo ointment, so as not to cause fading and damage the overall aesthetic feeling; Don't swim, sauna, bask in the sun or go into the sea until the tattoo area heals. It is normal for scabs, peeling and itching to appear in three to five days. Never scratch the scab until it falls off naturally. At this time, you can use lotion properly.

3. If the tattoo is at the joint or the part that is easy to be pulled, pay attention to the action when scabbing, so as to avoid scabbing and cracking, which will affect the future appearance; I don't want it behind the paper, so I can't wash it right away. It takes a year for the wound to heal, and then it can be cleaned by laser.

References:

Baidu encyclopedia-tattoo