First, there are five points on the hood: left vertex position, left third position, middle position, right third position and right vertex position. These five points can make it easy for us to judge the distance between the car body and the roadside, especially when parking on the ramp. These points allow us to stop exactly 30 cm from the sideline.

Second, the lower edge of the rearview mirror We usually look for the parking position through the lower edge of the rearview mirror. For example, when reversing into the warehouse, when the yellow line in front of the garage coincides with the lower edge of the rearview mirror, it means that it has entered the garage. If the rear of the car is upside down, it is the line pressing.

Third, the driver's shoulder, in fact, your shoulder is also one of the references to find a point, because everyone's height and sitting habits are different, so the position of the point we look at is different. At this time, we can find some points through our shoulders. For example, when turning at a right angle and our shoulders are facing the right corner, we will kill to the right.

Fourth, the left and right rear wheels, the rear wheels on both sides can let us know whether the storage position is accurate when reversing. Take the right wheel as an example. When the angular distance between our right wheel and the garage is 30 cm, the storage position is moderate. If the distance is too far, it means that our left wheel may press the line. If the distance is too close, it means that the right wheel may be pressed. So learn to look at the position of the wheels on both sides.

Fifth, the parking control line, in the different test items of subject 2, it is required to park the car on the prescribed parking line, otherwise the test will fail, such as starting on a ramp. When the wiper of the car coincides with the parking pole, our front will just press on the parking line. Actually, subject two is not difficult. Remember these five points, and you can pass them in one go.